-
Overview
-
Videos
-
Spare Parts
-
Q&A
-
Support
Overview
Videos
Spare Parts
Q&A
Support
Overview
CEN Racing Ford F450 Red Candy Apple 4x4 1/10 Scale Solid Axle 4WD Truck - RTR - CEG8982
Version Info: This truck is delivered as "RTR", however does require 4x AA batteries for the transmitter and either LiPo, LiHV or NiMH batteries, purchased separately (see Requires below for details).
The CEN Ford F450 SD KG1 Wheel Edition 1/10 4WD Solid Axle RTR Truck is the latest CEN release and one that may mark the beginning of a new generation of R/C scale and style that will be tough to beat! This is an officially licensed Ford F450 SD 1/10 4WD RTR Custom Truck DL-Series. It's true 1/10 scale RTR. Your CEN Racing car is backed by Motion RC's world-renowned customer service and technical support. Drive on!
Visit the Official CEN Racing Ford F450 4x4 1/10 Scale 4WD Truck Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
 |
Solid Suspension The Ford F450 boasts 3 links suspension, big bore oil filled adustable shocks and harden steel steering drag link. |
 |
High-Torque Power System Features a Mabuchi RS-550 High-Torque Motor and Hobbywing 40A WP-1040 with T connector manufactured by Hobbywing. |
 |
Trident-D Wheels The Ford F450 comes with KG1 FORGED Trident-D wheels. |
 |
RTR, Just Add Batteries Your CEN Ford F450 comes with a 2.4GHz transmitter. Simply add 4 AA batteries to the transmitter and your choice of battery for the truck (see Requires below) your adventure awaits! |
Features:
- ESC:
- Hobbywing 40A WP-1040-Brushed
- Water-proof and dust-proof for all weather
- Built-In Capacitor Module
- Automatic throttle range calibration
- Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
- Over-Heat protection and throttle signal loss protection
- Easily programmed with jumpers
- Motor:
- Mabuchi RS-550 High-Torque Motor
- Servo:
- 12Kg Servo by Savox
- 4.8V 0.26 sec/60deg 10.0 kg-cm
- 6.0V 0.23 sec/60deg 12.0 kg-cm
- 25T Horn Gear Spline
- High-Torque Servo Horn Saver
- Radio System:
- Pistol-Grip AMP 30 3 Channel Transmitter
- Digital Trimming
- Steering Dual-Rate (ST D/R) Adjustment
- End Point Adjustment (EPA)
- Built in Failsafe
- Chassis:
- Steel Frame Rails
- CMS (Chassis Mounted Servo) Chassis Design
- Stamped Steel Shock Hoops
- Steel Skid Plate
- Full Precision Ball Bearing Support
- Adjustable Turnbuckles
- Suspension:
- 3 Links Suspension with Panhard Bar Design
- Big Bore Oil Filled Adjustable Coil Over Shocks
- Harden Steel Steering Drag Link
- 6mm Aluminum Linkage
- Drivetrain:
- Sway bar included
- 4 Wheel Drive
- Center Shaft Drive Train for more power transferred to the wheels
- Highly Efficient Transmission System
- Wide Range Easy Changeable Gear Box Design
- Sealed transmission eliminates dirt and dust
- Sealed Axle housing
- 5mm Hardened Steel Axle shaft
- Differential Center Locker Front/Rear Planetary Gear Type
- Metal Transmission Gears
- Planetary Gear type Differential
- Wheels:
- KG1 FORGED Trident-D wheels. Front 35mm; Rear 31mm per wheel
Includes:
- CEN Racing Ford F450 Red Candy Apple 4x4 1/10 Scale Solid Axle 4WD Truck - RTR
Requires:
- 4x AA alkaline batteries for transmitter - we recommend the Admiral AA NiMH 2600mAh Rechargeable Batteries (Pack of 4)
- 7.2V NiMH battery pack or LiHV battery pack or 7.4V 2S or 11.1V 3S LiPo battery pack - we recommend the Admiral 5300mAh 2S 7.4V 60C Hard Case LiPo Battery with T Connector
- 3 Cell compatible battery charger - select a minimum 3 cell (3S) charger from our Charger Collection
Product Specifications:
Model Scale |
1/10 |
Length |
678.1mm / 26.7in |
Width |
290mm / 11.4in |
Height |
N/A |
Weight (No Battery) |
2500g / 88.1oz |
Wheelbase |
447mm / 17.6in |
Ground Clearance |
64mm / 2.5in |
Body |
ABS Plastic |
Chassis |
4WD |
Drivetrain |
N/A |
Wheel Size (Diameter x Width) |
N/A |
Wheel Hex Size |
N/A |
Tire Tread |
N/A |
Bushing Material |
N/A |
Suspension |
N/A |
Shock Type |
N/A |
Transmission |
N/A |
Gear Pitch |
N/A |
Internal Gear Ratio |
N/A |
Final Drive Ratio |
N/A |
Pinion |
N/A |
Spur Gear |
N/A |
Differential |
N/A |
Ball Bearings |
N/A |
Brakes |
N/A |
Electronic Speed Control |
Hobbywing 40A WP-1040-Brushed |
Motor |
RS-550 High Torque Brushed Motor |
Battery |
4x AA alkaline for transmitter and either NiMH/LiHV or LiPo battery (required) |
Max Battery Dimensions (L x W x H) |
N/A |
Servos |
2Kg Metal Gear Servo |
Radio |
Pistol-Grip AMP30 3 Channel 2.4GHz transmitter |
Lights |
Yes |
Sound |
No |
Water Resistant |
N/A |
Skill Level |
Beginner |
Assembly Time |
None |
Recommended Environment |
Outdoors, smooth to rugged surfaces |
Videos
Product Videos
Spare Parts
Product Spare Parts
1 - 2 of 2 results
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Support
Product support
Product Manuals:
If you need any additional assistance, please visit the Motion RC Help Center
Customer Reviews
-
Overview
-
Videos
-
Spare Parts
-
Q&A
-
Support
- Regular price
- $31900
- Sale price
- $31900
- Regular price
- $41900
- (Save $100.00)
- Unit price
- per
