-
Overview
-
Upgrades
-
Q&A
-
Support
Overview
Upgrades
Q&A
Support
Overview
HPI Racing Savage X FLUX V2 1/8 Scale 4WD Monster Truck - RTR - HPI160101
Version Info: This truck is delivered as "RTR", however does require 4x AA batteries for the transmitter, two 2S 7.8V 3000-6000mAh LiPo batteries with T connector in series or two 3S 11.1V 3000-6000mAh LiPo batteries with T connector in series and a battery charger, purchased separately (see Requires below for details).
Standing backflips with a mere blip of the throttle, tire shredding, terrain destroying power that'll make you run for cover... FLUX fans know where its at, the Savage X FLUX V2 is really not for the faint of heart!
The colossally powerful FLUX 2200KV motor is ready for all the power you can run through it, and the FLUX 6S-capable electronic speed controller is fully capable of up to 22.2 volts of power to let you pull off giant stunts and jaw-dropping speed.
Blistering Savage bashing action doesn't mean the Savage FLUX isn't a beautiful drive! They've gone all out with new Low Center of Gravity chassis design and layout along with a raft of updates with your bashing experience in mind. From the slick new battery boxes on the outside, to the twin clamp motor mount, center gearbox, and more inside the legendary TVP chassis!
In addition to a raft of new features including 17mm Aluminum Hex Hubs, all hex hardware, new bumpers, body, wheels & tires, this Next Level Savage X FLUX will rock your world and is backed by Motion RC's world-renowned customer service and technical support. Drive on!
Visit the Official HPI Racing Savage X FLUX V2 1/8 Scale 4WD Monster Truck Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
 |
The Beast Is Back The Savage started the RC Bashing movement and 2 decades later, they are still here, stronger than ever and thrilled to backflip back into the ring with the holy grail, the jewel in the crown... Ladies and gentlemen, the Savage is back! |
 |
All New Wheels and Tires A new Savage deserves a new set of brutally agressive HPI Havok 3.8" wheels, wrapped in yet another addition to the TREDZ "by HPI Racing" Tire rack. The Tredz Terrahex 3.8" Tires are designed tough, but for ultimate agility and handling at ground shaking speeds. |
 |
Ultimate Savage Toughness From the Super HD Drivetrain, to the Bulletproof 29/9T Differentials, to the new Rugged Bumpers, every inch of the Savage X FLUX V2 is built to survive and dominate. With beefy suspension arms, ready to take the punishment of big-air drops while everything within is protected by the reinforced thick aluminum TVP (Twin Vertical Plate) chassis, flanked by sturdy, new streamlined battery boxes. |
 |
Not For The Faint of Heart! Like all HPI trucks, the Savage X FLUX V2 is easy to drive with the included steering wheel controller - but it should be handled with extreme caution! Hit the gas and the 6S FLUX system blasts into action and to the uninitiated things can get pretty crazy VERY quickly! Expect insane standing backflips, while mud, rocks and dirt get slung at you when you pull the trigger! |
Features:
- NEW! Standardized 17mm Aluminum Hex Hubs
- NEW! Tredz Terrahex 3.8" Tires
- NEW! 3.8" Havok Wheels
- NEW! Pre-Cut Factory Finished And Decaled GT-6 Bodyshell
- NEW! Plastic molded body detail parts
- NEW! Rugged Modern Styled Bumpers
- NEW! Captured Hinge Pins
- NEW! All hex hardware
- NEW! LCG Chassis Design & Layout
- NEW! Twin Clamp Motor Mount
- NEW! Twin Battery Boxes
- NEW! Center Skid Plate
- NEW! Center Gearbox
- 4WD Shaft Driven Monster Truck
- Independent Double Wishbone Suspension
- Oil Filled Adjustable Coilover Shocks
- Bulletproof 29/9T Differentials
- ELH-6S 150A ESC & MLH-2200KV Brushless Motor
- 43T Steel Spur Gear - Twin Slipper Clutch
Includes:
- HPI Racing Savage X FLUX V2 1/8 Scale 4WD Monster Truck - RTR
- ELH-6S 150A ESC & MLH-2200KV Brushless Motor
- ELH-6S FLUX ESC 150A Waterproof with T connectors
- TF-41 2.4GHZ 3CH Radio
- RF-50 Receiver
Requires:
- 4x AA NiMH batteries - we recommend the Admiral AA NiMH 2600mAh Rechargeable Batteries (Pack of 4)
- TWO 2S 7.8V 4000 - 6000mAh LiPo batteries with T connector in series or TWO 3S 11.1V 4000 - 6000mAh LiPo batteries with T connector in series - we recommend TWO of the Admiral 5300mAh 3S 11.1V 60C Hard Case LiPo Battery with T Connector
- 4S LiPo compatible battery charger - select a minimum 4 Cell battery charger from our Battery Collection
Product Specifications:
Model Scale |
1/8 |
Length |
534mm / 21.0in |
Width |
445mm / 17.5in |
Height |
250mm / 9.8in |
Weight (No Battery) |
N/A |
Wheelbase |
N/A |
Ground Clearance |
N/A |
Body |
ABS Plastic |
Chassis |
N/A |
Drivetrain |
N/A |
Wheel Size (Diameter x Width) |
N/A |
Wheel Hex Size |
N/A |
Tire Tread |
N/A |
Bushing Material |
N/A |
Suspension |
N/A |
Shock Type |
N/A |
Transmission |
N/A |
Gear Pitch |
N/A |
Internal Gear Ratio |
20.52:1 |
Final Drive Ratio |
N/A |
Pinion |
N/A |
Spur Gear |
N/A |
Differential |
N/A |
Ball Bearings |
N/A |
Brakes |
N/A |
Electronic Speed Control |
ELH-6S FLUX ESC 150A Waterproof with T connectors |
Motor |
ELH-6S 150A ESC & MLH-2200KV Brushless Motor |
Battery |
TWO 2S 7.8V 4000 - 6000mAh LiPo batteries with T connector in series or |
Max Battery Dimensions (L x W x H) |
N/A |
Servos |
N/A |
Radio |
TF-41 2.4GHZ 3CH Radio |
Lights |
No |
Sound |
No |
Water Resistant |
N/A |
Skill Level |
Beginner |
Assembly Time |
None |
Recommended Environment |
Outdoors, smooth to rugged surfaces |
Upgrades
Product Upgrades
1 - 2 of 2 results
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Support
Product support
Product Manuals:
Â
If you need any additional assistance, please visit the Motion RC Help Center
Customer Reviews
-
Overview
-
Upgrades
-
Q&A
-
Support
- Regular price
- $64999
- Sale price
- $64999
- Regular price
- $
- (Save $-649.99)
- Unit price
- per
