-
Overview
-
Videos
-
Spare Parts
-
Upgrades
-
Q&A
-
Support
Overview
Videos
Spare Parts
Upgrades
Q&A
Support
Overview
Freewing Pandora 4-in-1 Red 1400mm (55") Wingspan - PNP - FT30121P
The Freewing Pandora is not only one of the best beginner planes on the market, it is a great intermediate plane too. How is this possible? The Pandora ships as a high wing trainer. Simply change the canopy to the included low wing canopy and move the wings to the bottom of the fuselage and you now have a light sport low wing plane perfect for an intermediate pilot. In addition there are two sets of wheels. There is a set of tricycle landing gear which the Motion RC Pilots think looks best on the low wing plane, and there is a set of "Big Wheel" landing gear in tail dragger format which is perfect for grass and dirt takeoff/landing. The "Big Wheels" even work on tall thick grass with ease.
You literally have 4 combinations and can make 4 different planes. This is a fantastic concept which is very enjoyable to fly. The Pandora does not get knocked around by the wind as much as a smaller plane. We don't recommend beginners fly any RC plane in a lot of wind but this plane is easier than most to fly in a bit of wind because of the larger size and weight. The guys at Motion RC think the Freewing Pandora may quickly become the plane of choice for both beginner and intermediate pilots.
Visit the Official Freewing 1400mm Pandora 4-in-1 Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:
- High wing and low wing configuration included in one plane
- Tricycle landing gear and tail dragger landing gear included
- Included BIG wheels for tall grass takeoff and landings
- Molded wing pocket for optional flap servos - hardware and push rods are included
- Durable EPO foam construction
- Nylon hinges on all control surfaces
- Brushless motor, ESC, and 4 micro servos installed
Requires:
- 4 Channel Radio - Select a minimum 4 channel radio from our Radio Collection
- 4 Channel Receiver - Select a minimum 4 channel receiver from our Receiver Collection
- 3 Cell 11.1V 2200 mAh Lipo Battery with XT60 Connector - EPR22003X6
- 3 Cell Compatible Battery Charger - Select a minimum 3 cell (3S) charger from our Charger Collection
Product Specifications:
Wingspan |
1400mm/55.1in |
Length |
1180mm/46.5in |
Flying Weight |
1500g / 53 ounces |
Power System |
Brushless 3536-800Kv |
Speed Control |
30A, Internal BEC, XT60 connector |
Propeller / EDF |
11x6 3 blade prop |
Servos |
|
Landing Gear |
Fixed tricycle or tail dragger. Small or large wheels |
Required Battery |
11.1V 2200mAh 25C 3 cell LiPo with XT60 connector |
Required Radio |
4 Channel |
Rudder |
Yes |
Flaps |
Optional - MD31091R-300 and MD31091-300 |
Ailerons |
Yes |
Lights |
No |
Hinge Type |
Nylon hinges on all control surfaces |
Material |
EPO Foam |
Videos
Product Videos
Spare Parts
Product Spare Parts
0 - 32 of 43 results
Upgrades
Product Upgrades
1 - 8 of 8 results
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Support
Product support
Product Manuals:
Product Updates:
- May 6, 2013 - Optional flaps are molded into the wings along with a pocket for the flap servos. Better yet, the hardware for the optional flaps is included. You only need two 9 gram servos to make the flaps fully operational in about 10 minutes. If you use one flap channel, you will need a Y cable, one forward 9g servo, and one reverse 9g servo. If you use two channels for flaps, you can use two forward 9g servos and reverse one channel using your radio. If you need any help picking out servos for the flaps, the guys at Motion RC are happy to help.
If you need any additional assistance, please visit the Motion RC Help Center
Customer Reviews
-
Overview
-
Videos
-
Spare Parts
-
Upgrades
-
Q&A
-
Support
- Regular price
- $24500
- Sale price
- $24500
- Regular price
- $
- (Save $-245.00)
- Unit price
- per
