Dynam Albatros D.Va 1270mm (50") Wingspan - PNP
Dynam Albatros D.Va 1270mm (50") Wingspan - PNP - DY8960PNP
The Albatros D.V was a fighter aircraft used by the Luftstreitkrfte (Imperial German Air Service) during World War I. The D.V was the final development of the Albatros D.I family, and the last Albatros fighter to see operational service. Despite its well-known shortcomings and general obsolescence, approximately 900 D.V and 1,612 D.Va aircraft were built before production halted in early 1918. The D.Va continued in operational service until the end of the war. The Dynam Albatros has nice scale appeal and is a great performer. Just add your receiver and 4 Cell 14.8V 2200 mAh LiPo battery and take to the skies in this legendary WWI fighter!
- Realistic scale features including hand painted pilot figure, machine guns, engine and molded panel lines
- Powerful BM3720A-KV600 Brushless Outrunner motor
- Dynam Albatros D.Va 1270mm (50") Wingspan - Receiver Ready
- ESC with XT60 connector, servos and motor come pre-installed for your convenience
- Decal set
- 4 Channel Radio - Select a minimum 4 channel radio from our Radio Collection
- 4 Channel Receiver - Select a minimum 4 channel receiver from our Receiver Collection
- 4 Cell 14.8V 2200 - 3600mAh LiPo Battery with XT60 connector - We recommend EPR36004X6
- 4 Cell Compatible Battery Charger - Select a minimum 4 cell (4S) charger from our Charger Collection
1270mm / 50in
1055mm / 41.5in
1600g / 56.5oz
|CG (Center of Gravity)||60-65mm from the leading edge of the top wing at the wing root|
BM3720A-KV600 Brushless Outrunner motor
Electronic Speed Control
40A Brushless with XT60 connector
Propeller / EDF
4x 9g standard
4S 14.8V 2200 - 3600mAh LiPo (required)
4 Channel (required)
|Build Time||2-3 Hours|
Product Spare Parts
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
Recently Viewed Products
Nice looking plane wich fly`s well . Statik points for struts and undercarridge are very badly glued . They come after a normal landing out of foam . Rudder blade also Elevator blade warped . Sieht gut aus und fliegt auch so . Aufnahmepunkte für Streben und Fahrwerk äußerst unzureichend verklebt . Nach weicher Landung lösen diese sich vom Rumpf . Seiten - und Höhenruderblatt verzogen .
The horrible pilot
I forgot to include a note in my previous review about the pilot figure provided with the Albatros. What is Dynam thinking? I mean the pilot figure isn’t remotely the correct scale and is very odd looking. There is no way I am installing that thing in this nice looking airplane! Now I’m on the hunt for a 1/7 WWI pilot.
It’s good and bad
Just finished assembling this airplane and wanted to note a couple things. I really like this plane and WWI ARF’s seem harder to find nowadays. Anyway the wingtips on both wings were bent and wrinkled as there was no padding in their box. The rudder pushrod was misrouted (easy fix but it was still a problem). The wing struts included were the same instead of a left and a right. The wing strut mounts glued into the wing are the same, again no left and right. It’s confusing but I got it together. The biggy was that the main wing spar wasn’t glued in the top wing properly. This could have resulted in a failure in flight so I’m glad I found it. This is my first Dynam plane and seems to have typical Dynam problems that I have read about. I’ll update this review after I get a few flights on it. Overall I’m happy and I think it is a neat plane, I just wish there was an allied aircraft like a Camel to go with it. For the money you cant go wrong.
over all very easy assy. plan was shipped in its box no damged to foam plan flys very nice
The plane arrives with some wing tip damage. Managed to get it put together disputed the poor instructions. The plane is larger than I expected, won’t be able to maiden it until I get home. Got to quit buying and start flying, to date my hanger has over twenty planes..
All good. Added nose weight to compensate for tail heavy reviews. All good on maiden. Reducing for tomorrow’s flight
Tail Heavy and Flimsy.
Pros: Great looking plane. Shock absorbing landing gear is cool. Price point is good for this size plane. Cons: Poor Instructions. Very weak supporting structures (cabane struts, LG struts, mount points.). I can grab and shake any of my other planes without them falling apart. This plane would disintegrate; cheap plastic parts. Wing supports are not adequately rigid. LG structure is too weak for the shock absorbing to function. The design makes it tail heavy; even with a larger battery. Pilot figure is way too small.
The Red Baron Rides Again!
OK, I'm a sucker for biplanes, but this one is especially beautiful. It looks great on the ground, and even better in the air. Build is straight-forward, and everything fit as it should.There were some minor bends on the wingtips, but nothing that affected flying quality. Helpful hint - be sure to balance the spinner, as well as the prop. My spinner was way out of balance and I did not balance it until after my first flight where the vibrations were enough to eject one of the machine guns. Great plane, and begs for some custom detailing touches.
The Dynam Albatros
This was a snap to assemble. It's such a nice looking aircraft I couldn't help but get a little bit more involved detailing the engine, guns, adding a slightly larger pilot and giving him a mustache, and dirt around his face except for the goggle area, and of course a scarf. Overall a very good quality aircraft. No problems with the exception of the usual, Chinese to Portuguese to Swedish to English instructions. Biggest problem, only problem, was getting the CG correct. Also added grey soot look to the fuze and a used grease look to the landing gear. Clear coated the wings and tail (all control surfaces on top only). And added plastic hinges to all control surfaces. Also added tan paint with some ragged on walnut color paint for a second coat, then clear coated the props, to give the props a very nice wood look. The only thing I didn't like was the battery access. I was tempered to add a switch to make start up easier. Just a note: Make sure all the servos are set at mid range and do any other adjustments to the electronics before you affix the Bottom wing to the fuselage .