Cart Preview

Dynam Waco Yellow 1270mm (50") Wingspan - PNP

Brand: Dynam /
Regular price 185.00 $18500 Free Shipping*
Status:
104  | 

Available Product Formats (More Info)

Share:
DY8952PNP

Dynam Waco Yellow 1270mm (50") Wingspan - PNP - DY8952PNP

The Dynam Waco Bi-Plane offers an appealing combination of performance, style and affordability. Designed using the latest technology in durable EPO foam providing lightweight and structural rigidity. The result is an aircraft that offers awesome levels of performance. This bi-plane spans its wings at 50 inches and sits at an overall length of almost 39 inches. The large prop is thrown by a BM3720A-650KV brushless motor supported by a Dynam 40A electronic speed controller. Control surfaces are handled by four 9 gram Detrum servos and includes a steerable tail wheel for easy taxing around the runway. Requires a 14.8V 2200mah Li-Po Battery, 4 channel radio and receiver. When more power is needed during sports aerobatic flying the Detrum power system delivers it effortlessly and smoothly. An easy access hatch allows for quick battery changes without having to remove the wings. The power plant and scale like features allow this plane to fly gracefully with outstanding flight characteristics.

  Visit the Official Dynam Waco Yellow Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.

Features:

  • Highly scaled and attractive yellow paint scheme plus decal trim sheet
  • Powerful BM3720A-KV650 Brushless Outrunner motor

Includes:

  • Dynam Waco Yellow 1270mm (50") Wingspan - Receiver Ready - (PNP)
  • ESC with XT60 connector, servos and motor come pre-installed for your convenience
  • Decal set

Requires:

  • 4 Channel Radio - Select a minimum 4 channel radio from our Radio Collection 
  • 4 Channel Receiver - Select a minimum 4 channel receiver from our Receiver Collection
  • 4 Cell 14.8V 2200 mAh LiPo Battery with XT60 connector - EPR22004X6
  • 4 Cell Compatible Battery Charger - Select a minimum 4 cell (4S) charger from our Charger Collection

Product Specifications:

AGE LEVEL : 14 and up
SKILL LEVEL : Intermediate
BUILD TIME : 3+ Hours

Wingspan

1270mm / 50in

Length

983mm / 38.7in

Flying Weight

1550g

CG (Center of Gravity)70-75mm from the leading edge of the top wing

Power System

BM3720A-KV650 Brushless Outrunner Motor

Electronic Speed Control

40A Brushless with XT60 connector

Propeller / EDF

2-Blade Prop

Servos

9g x 4

Landing GearFixed

Required Battery

4S 14.8V 2200mAh LiPo (required)

Required Radio

4 Channel (required)

AileronsYes

Elevator

Yes

RudderYes

Flaps

No

Lights

Yes

Hinge Type

Foam

MaterialEPO Foam
Skill LevelIntermediate
Build Time2 Hours
Recommended EnvironmentOutdoor

Product Videos

Product Questions & Answers

NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.

Product Support

Product Manuals:

Product Updates:

  • November 18, 2016  -  Do not use lock tite on the bolts that attach the wing struts to the wing.  For the RTF version make sure the included Detrum receiver/gyro is securely mounted to the fuselage before attempting to fly.

 

If you need any additional assistance, please visit the Motion RC Help Center

Recently Viewed Products

Product Reviews

Customer Reviews

Based on 104 reviews
5 Star
54% 
56
4 Star
29% 
30
3 Star
13% 
14
2 Star
2% 
2
1 Star
2% 
2
Customer Photos
  • How difficult or easy is the product to assemble, use, or operate? Easy Very DifficultDifficultAverageEasyVery Easy
  • How well does the product perform / function? Good Very WeakWeakOkayGoodVery Good
  • How would you rate the overall quality of the product? Okay Very LowLowOkayGoodVery Good
  • How would you rate the value of the product for the money? Good Very LowLowOkayGoodVery Good
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

EA
01/08/2019
Ernest A.
Spain
  • How would you rate the overall quality of the product? Very LowLowOkayGoodVery Good
  • How would you rate the value of the product for the money? Very LowLowOkayGoodVery Good
  • How difficult or easy is the product to assemble, use, or operate? Very DifficultDifficultAverageEasyVery Easy
  • How well does the product perform / function? Very WeakWeakOkayGoodVery Good

Easy flyer with moderate acro capabilities

Just put it on flight with FPV, the only difficulty was to set up the throttle with response all along the axis. Flew good, went into classic aerobatic maneuvers, even spin and snap rolls. It ended in a crash due to low aerobatics, but only damage was oanding gear ripped apart, rest of the plane is intact and will continue flying good. Motor plate was also reinforced and glued to the foam to avoid vibrations. I’ll think I’ll fly it for a loong time

Ernest A. verified customer review of Dynam Waco Yellow 1270mm (50) Wingspan - PNP
JC
11/30/2018
Jack C.
United States
  • How would you rate the overall quality of the product? Very LowLowOkayGoodVery Good
  • How would you rate the value of the product for the money? Very LowLowOkayGoodVery Good
  • How difficult or easy is the product to assemble, use, or operate? Very DifficultDifficultAverageEasyVery Easy
  • How well does the product perform / function? Very WeakWeakOkayGoodVery Good

Dynam Waco

Loved the little Waco, but I do have a couple of complaints. The tabs for mounting the Cabane struts and Interplane struts were so brittle that halve of them broke on instillation. I had to manufacture new ones from fiberglas. One of the elevators was extremely warped. Plane flew great and was all that I would expect at this price.

CC
11/29/2018
Charles C.
United States
  • How would you rate the overall quality of the product? Very LowLowOkayGoodVery Good
  • How would you rate the value of the product for the money? Very LowLowOkayGoodVery Good
  • How difficult or easy is the product to assemble, use, or operate? Very DifficultDifficultAverageEasyVery Easy
  • How well does the product perform / function? Very WeakWeakOkayGoodVery Good

WACO WACO 1270

Very good looking bi plane, especially since I added black flames to the top of the wings and down the fuselage instead of the stripes. I wish it came in the E-flite UMX version paint scheme I'd buy a couple of those. Maybe I will have to repaint one of these, depends on how well it flies.

BE
11/15/2018
Bill E.
Canada
  • How would you rate the overall quality of the product? Very LowLowOkayGoodVery Good
  • How would you rate the value of the product for the money? Very LowLowOkayGoodVery Good
  • How difficult or easy is the product to assemble, use, or operate? Very DifficultDifficultAverageEasyVery Easy
  • How well does the product perform / function? Very WeakWeakOkayGoodVery Good

Dynam Waco Yellow 1270mm

Stabilizer was warped.

Bill E. verified customer review of Dynam Waco Yellow 1270mm (50) Wingspan - PNP
EC
10/20/2018
Elmer C.
United States
  • How would you rate the overall quality of the product? Very LowLowOkayGoodVery Good
  • How would you rate the value of the product for the money? Very LowLowOkayGoodVery Good
  • How difficult or easy is the product to assemble, use, or operate? Very DifficultDifficultAverageEasyVery Easy
  • How well does the product perform / function? Very WeakWeakOkayGoodVery Good

Good Flying Airplane, but check the motor mount screws !

Instructions are marginal, if your experienced you will be okay, if you are new to the hobby you will be lost - quickly. I purchased the PNP version, the motor came already installed and I did not check the mounting bolts on the engine, apparently they were not tightened at the factory, or they forgot to use some type of thread lock on them. On the third flight the engine came loose and ejected from the airplane while in flight. Lucky for me I was very close to the landing area and was able to get the plane back to a soft spot . So only damage was to the cowling and the engine itself. MRC is working with me to replace the cowling & motor. Other than that the airplane went together well, and flew fantastic for the first two flights. Hopefully it will be back in the air soon. I would still recommend this as your first bi-plane, just be sure to check the motor mounting bolts before you fly !

Elmer C. verified customer review of Dynam Waco Yellow 1270mm (50) Wingspan - PNPElmer C. verified customer review of Dynam Waco Yellow 1270mm (50) Wingspan - PNP
TP
09/18/2018
thomas p.
  • How would you rate the overall quality of the product? Very LowLowOkayGoodVery Good
  • How would you rate the value of the product for the money? Very LowLowOkayGoodVery Good
  • How difficult or easy is the product to assemble, use, or operate? Very DifficultDifficultAverageEasyVery Easy
  • How well does the product perform / function? Very WeakWeakOkayGoodVery Good

oops

First flight battery hatch popped up right at lift-off and acted like a spoiler, planed stalled and bent the landing gear. Hung on ceiling in basement for two years. Finally got around to straightening the landing gear, added two small magnets to the front of the hatch, and made it out to the field. Flight went well, Some trim issues to get it flying straight but then a joy to fly. Tracked well, loops and rolls were good. Looked great in the air. Kicking myself in the back side for waiting two years to get her back in the air. Will be a frequent flier now.

WL
09/16/2018
wayne l.
United States

Wayne -WAYNE'S REPAIR

This is my 2nd Waco .Great flying plane ! After the first one I learned to beef up all hinges,metal gear servos and add magnets too front canopy.I also clear coat all my planes before assembling-makes them more durable ! After owning a few Dynam planes this is the only one i would recommend !

RM
09/12/2018
Richard M.
United States
  • How would you rate the overall quality of the product? Very LowLowOkayGoodVery Good
  • How would you rate the value of the product for the money? Very LowLowOkayGoodVery Good
  • How difficult or easy is the product to assemble, use, or operate? Very DifficultDifficultAverageEasyVery Easy
  • How well does the product perform / function? Very WeakWeakOkayGoodVery Good

I purchased my first Waco

I purchased my first Waco back on July 30th. I went together without any flaws. Everything lined up where it was supposed to. The hardware was complete and as opposed to other ARF's I've had worked fine. The plane looked and flew great, two click of up trim one of right aileron. I couldn't ask for anything better and was a little confused as to why some of the reviews came up negative. Unfortunately then came the mid air. The plane was not repairable and as soon as I got home ordered another one. The second one didn't assemble anything close to the experience I had with the first. Wings and tail group were wrapped. The motor attachment plate was not even glued in.... total bummer. Repairing the warps was not to my satisfaction as I like good looking airplanes and although somewhat correctable, being very careful with heat, the surface finish disappeared showing the beaded foam understructure. Although not as good looking I went to the field and gave it a try. Everything was trimmed out to neutral and balance point set per instructions but I was in for a wild ride. The plane dove violently. Having the plane drop low I didn't have enough elevator to get it back to level when turning to climb before it hit the ground. I've since pieced it back together and and for the second try had someone next to me working the trims as insurance. The plane flew but not without fill up trim on the elevator resulting in about 1/8" up elevator from level to the stab. I would have dumped it again if I didn't have the guy next to me. I need to mention that Motion RC was great, I have no complaints what so ever with their service. On the first Waco the ESC burned out. Notice the ESC is totally encased in foam with no way to get some airflow over it as the plastic ***** engine is flush to the ESC cavity. Some of the reviews mention this fact but not having read them at the time didn't take it into consideration as electrics are new to me. You need to cut some of the plastic ***** engine and foam behind it to remedy the problem. After calling Motion they offered to send me a replacement but I opted for a credit to put in a better unit which they issued within a day. Great service and response. Can't say anything negative about Motion. My only recommendation is that if the ARF does not assemble easily have someone next to you handling the trims. One you get it fling straight it flys well but I don't like the fact that the elevator is not flush to the stab, it's just not right but that's just me.

CP
08/10/2018
Chad P.
Kennewick, Wa
  • How would you rate the overall quality of the product? Very LowLowOkayGoodVery Good
  • How would you rate the value of the product for the money? Very LowLowOkayGoodVery Good
  • How difficult or easy is the product to assemble, use, or operate? Very DifficultDifficultAverageEasyVery Easy
  • How well does the product perform / function? Very WeakWeakOkayGoodVery Good

Very solid flyer

After a few screw issues, the build was straight forward and produces a handsome airplane. I put several coats of high gloss clearcoat to protect the flat yellow paint and that really made it shine. It gets more looks and conversation than any of my airplanes. I run a 12x7 3blade prop and no flight stabilization or gyro. It can carry my go pro up on the top wing and don't really notice the extra drag like some of my other planes. Another plus !

Top