VC400 AIO NTSC 600TVL 120 FOV FPV Camera w/OSD and Video Transmitter from ZOHD - ZOH1000-003

Can you say simple? If you have goggles, this is everything you need for FPV. This is a camera with OSD nd VTX (video transmitter) all in one. No need to solder.  This canbe powered from a 2S to 6S LiPo with a JST connector. The VC400 is ZOHD’s first Camera System. Aimed to be the perfect match and companion for the KOPILOT Lite, this camera will give you a ton of punch in a super tiny footprint. These days FPV systems are getting more capable and powerful, but at the same time more complex. Complexity can dial back the fun factor and your free time. Setting up a traditional FPV system (VTX, OSD, and camera) could be a matter of hours, days, and sometimes weeks until everything is ironed out.

The VC400 was created to reduce that “bench time” to literally 5 minutes: Strap the cam to any plane, quad, car, boat (even your dog!), connect the power and you’re ready to go. LOS pilot? do you want experience FPV in your warbird or EDF Jet? We have you covered! VC400 allows you to experience FPV on virtually any plane without modifying or having a single scratch or cut on your model.

Spend your free time enjoying FPV and not suffering through long config files, or complex wiring diagrams. Are you an experienced FPV pilot? No problem, the VC400, and its powerful 400mW video transmitter will also allow for a quick cam setup to test your rig before installing your expensive professional gear.

Features:

• 3-in-1 AIO integrated design, with camera, VTx and antenna
• Ultra lightweight and small size, a great solution for light-weight airplanes
• OSD shows Power and Input Voltage to tell how long you can keep flying
• Default JST plug and up to 25cm power cable, long enough for most small size airplanes
• Up to 2.5km video transmission range on 400mW
• Wide voltage input from 7-28V, safe for all kinds of battery or BEC input
• Customized velcro strap to hold the camera and EVA foam for anti-vibration
• Switchable between 0.1mW / 25mW / 200mW / 400mW
• Optional Clover / Dipole antenna for different airframes and flight mode (for straight line flights or flying around)
• 5.8Ghz VTx with 40 racing channels
• Allows you to display customized call signs

Includes:

• ZOHD VC400 AIO NTSC 600TVL 120 FOV FPV Camera w/OSD

Requires:

• 2S to 6S LiPo battery with JST connector - we recommend the Admiral 1000mAh 3S 11.1V 30C LiPo Battery with JST Connector
  
• FPV Goggles - we recommend the Xwave 800x480 5in FPV Goggles

Product Specifications: