MrRCSound TT-25 Transducer Speaker
MrRCSound Additional TT-25 Transducer (Speaker) for Aircraft
There is not need to cut holes on your plane to mount the TT-25. Simply peel the backing off the self stick adhesive and stick the speaker onto the wall of the inside of your plane. This turns your whole plane into a speaker - really. You can increase the decibel level of your single TT-25 MrRCSound system by using an additional TT-25. A second TT-25 easily plugs into the sound board. A second TT-25 is recommend for planes 1400mm to 1650mm. If your plane is over 1650mm, we recommend a 3 additional TT-25 which also requires the MrRCSound amplifier. You can keep TT-25 in each of your planes and move the sound board from plane to plane. This way you have sound in every plane!
- Weighs only 2.7oz - 3.1oz
- Only 2" diameter and 1" thick
- No need to cut holes in your plane to use the TT-25
- Easy mounting inside the fuse with a little dab of CA or Epoxy
- No dead spots because you whole plane is the speaker
- Improved bass response over a standard speaker
- Rugged - no paper cone to damage in a crash
- 108db (max) at 1M sound output
Speakers are rated in SPL, or Sound Pressure Level. The higher the SPL of a speaker, the more efficient it is. Meaning it can put out a higher sound level, with less energy input. Most speakers in the 2"-4" inch size range are rated about 84-86db SPL, or decibels produced at 1 meter with 1W of input. The TT-25 is rated at a higher SPL. This means it delivers as much or more sound output than most 4" speakers in a smaller and lighter package (only 2.5oz) while using less energy at that same time. This translates to more flying time!
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
I purchased the Mr. RC sound sound board and a pair of speakers initially. After a while I wanted sound in more airplanes as the soundboard is easy to move from one airplane to another. I haven't purchased the amplifier yet but I may need to do so because even with 2 transducers the sound isn't very loud in my 1400 mm corsair. The start up sounds on the ground are pretty cool though especially when someone unfamiliar is watching
Best Transducer Available!
This works the best of any I have used. It works well with my GT Power aircraft sound system.
TT25 Transducer speaker.
I bought this to use with my MR RC Sound system, but it can be used with any similar sized RC sound system. For its size the TT25 cannot be beaten for volume and depth of sound frequencies in my experience. In this price range I'm sure it can't be beaten. A tip for mounting: use a glue that has some 'give' in it, not stiff like Cyano, but with a bit of give like say foamtac, and the TT25 will stay attached for years.
I'am using the TT-25 in a RedCat Blackout Pro 4 wheel drive truck with a different sound system and it is really the best way to have a loud and clear sound and it is small and light and works great with the plastic body, I mounted it in the roof and you get the same amount of sound in all direction, so far it is just great.
I used it in my Red Cat Blackout Pro with a different sound system, I put it in the roof of the cab and it sounds great, I would buy again. Thanks for a great product.
SUPPER AAA ITTEM
SO GLAD I TOOK THE ADVICE AND ADDED THE EXTRA TRANSDUCER!!!