Dynam B-26 Marauder 1500mm (59") Wingspan - PNP
Dynam B-26 Marauder 1500mm (59") Wingspan - PNP - DY8972PNP
The Martin B-26 Marauder was one of the most successful Allied bombers of World War II. After a challenging introduction, the B-26 eventually became beloved for its exceptional durability and excellent medium bomber capabilities. Nicknamed the “Flying Torpedo”, the B-26 Marauder ended the war with the lowest combat loss rate of any American aircraft, bringing thousands of aviators safely home.
Dynam’s 1500mm wingspan B-26 Marauder brings the familiar scale outline of this iconic aircraft to the skies again! The aircraft is Dynam’s most ambitious warbird to date, introducing redesigned tricycle retracts for improved reliability and all new counter rotating propellers for scale appearance. To maximize convenient assembly and transport, the B-26’s outer wings can be detached from the engine nacelles, or the entire wing can be removed as one single piece. Major assembly of the aircraft is completed with only ten screws! For a large aircraft its size, the Dynam B-26 can be made very portable to fit in a small car’s trunk in under three minutes.
The aircraft is optimized for a 4s 4000 battery for extended flight time and a good balance of thrust, wing loading, and flight duration. A large battery hatch provides plenty of space for a receiver or optional gyro. Flaps shorten takeoffs and reduce landing speeds, and the tall rudder has excellent authority. Power is provided by two Detrum 3512-650kV brushless motors for satisfying sport scale performance. The two Skylord 40A ESCs are mounted behind each motor for ideal cooling and the counter-rotating 10.5x8 propellers enhance the scale fidelity of the aircraft. Providing capable handling on short grass runways, in addition to the redesigned retracts the Dynam B-26 Marauder also features steel wire struts and soft scale sized foam rubber tires.
Model aircraft from Dynam make excellent cost effective platforms for personalization and detailing, and this B-26 continues that tradition. The canopy and nose covers are easily removed for detailing inside by ambitious modelers. There is even space in the belly if pilots want to add their own bomb bay door. We are also proud to partner with www.Callie-Graphics.com for a wide lineup of optional decal sets to help customize your Dynam B-26 with several other liveries representing aircraft from both the Pacific and European theaters of World War II. With Dynam and your imagination, the sky isn’t the limit, it’s just the beginning!
Visit the Official Dynam B-26 Marauder Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
- Three-piece main wing and detachable horizontal stabilizer and vertical stabilizer for easy assembly, transport, and storage
- Redesigned electric servoless retracts
- All new scale counter-rotating propellers (a first for Dynam!)
- Special scale details including forward, rear, top and side gun turrets
- Optimal cooling position for ESCs
- Four panel flaps
- Bright LED lights
- Dynam B-26 Marauder 1500mm (59") Wingspan - (PNP)
- ESCs with XT60 connectors, servos, flaps and motor come pre-installed for your convenience
- Decal set
- 6 Channel Radio - Select a minimum 6 channel radio from our Radio Collection
- 6 Channel Receiver - Select a minimum 6 channel receiver from our Receiver Collection
- 4 Cell 14.8V 4000 mAh LiPo Battery with XT60 connector - EPR40004X6
- 4 Cell Compatible Battery Charger - Select a minimum 4 cell (4S) charger from our Charger Collection
1500mm / 59in
1126mm / 44.3in
~2350g / 82.89oz
|CG (Center of Gravity)||Refer to the manual|
2x 3512-650kV Brushless Outrunner Motors
Electronic Speed Control
2x Skylord 40A ESCs with XT60 connectors
Counter-rotating 10.5x8 propellers
9g standard with one 550mm lead and one 300mm lead : left aileron, right aileron
|Landing Gear||Electric servoless retracts|
4S 14.8V 4000mAh LiPo Battery
|Build Time||2 Hours|
Product Spare Parts
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
- price point
WARNING!!! The rear wing mount screw brackets can pull out very easily from over tightening, rough runways, or high G maneuvers!!! Mine did and luckily I was able to land it with the fuselage hanging from the front mounts. Relocated them lower, below more foam and reinforced area. Read other reviews. Great value, fly's great and lots of fun for the buck!!!
Be ready for some work
Ok, I'll admit it, I have two B-26's. It's a beautiful airplane. The only thing is you get what you pay for. I.e. misaligned parts, hanging up gear, and nonworking flaps. Otherwise, she's a doll. If you don't mind frustration along with a bad feeling about wanna be aircraft manufacturers, get one,or two, or...
Only issue I had with mine is the factory miss glued the fuselage parts together and there is a small gap on the right hand side of the airplane.. really doesn’t bother me much but I wish they would take more time on assembly And what is up with the hard wheels all the time Every airplane I have gotten from Motion RC or any other RC company the landing gear wheels are always hard as a rock Solution Dave Brown squishy wheels
Ed A doesn’t even own this model. He just doesn’t like Dynam “Airlines “ as he put it. Why is he allowed to post his assumptions? I do own this airplane and it flys great! If you’re having trouble putting it together then this model is above your skill set. You can’t come into this hobby blind, to do it right there is a steep learning curve!
Easy to assemble but takes out props very easily, and stalls very quickly! Better fly with a gyro!
No issues, good deal
I already had this plane and bought a second one as spare. The plane came without defects and everything working fine. Thank Motion
Dynam B-26 Dec 2018
I recently purchased this Dynam B-26. Going over the airplane I noticed a lot of poor fitting foam where the wings attach. The flaps were not glued and hanging loose. The gear was iffy and sometimes would go down and other times not work at all. I had to take the center wing off and reconnect all the servo connectors. The gear is still no reliable to release or retract. The wiring labels had all fallen off their respective wires so I had to trial and error and relabel. The wing tip attachments were not well fitted and the wiring into the wings was not easy. The decals were old school where you have to soak in water and extremely careful not to tear the decals when applying. A real pain. The rats nest of wiring is also a mess and makes attaching the canopy difficult. I have not yet been able to test fly the plane with all the problems.
good looking kit
bought this dynam B26 for its size & twin engine power.. plan to repair & upgrade as needed... not impressed with how dynam packs and wraps there planes.. aliron & flaps need to be reglued/repaired, the tail weight was loose an rattling inside,the tags IDing the wires were all unattached inside,the plastic guns on the tail are broken.. all this is minor to me .. dynams quallty standards is not impressive... Motion RC ships quickly with good tracking info.. with a good track record of support when requested.. I look forward to my next purchase from Motion RC.. just not dynam...
great good to deal with