Dynam P-51D Mustang V2 1200mm (47") Wingspan - PNP
Dynam P-51D Mustang V2 1200mm (47") Wingspan - PNP - DY8939PNP
This is the new and improved version (V2) of the Dynam P-51D Mustang PNP and it stands ready to show her supremacy and is virtually ready for those Axis bandits! This new version now includes a Tomcat Skylord 30 Amp ESC with a XT60 connector, pre-installed flaps, pre-installed flap servos, LED lights with pre-soldered connector ends and LED light controller for static and flashing operations. All you need is a 5 channel radio, 5 channel receiver and 3S 11.1V 2200 mAh Li-Po battery and you're ready take to the skies!
The flight times of this Dynam Mustang are a bit longer than average. While power is not massive there is plenty of power for scale loops, rolls, and immelmann turns. We actually really like this Dynam P-51D for its ability to wring out more and more minutes from the 3S 2200.
- NEW! Tomcat Skylord 30 Amp ESC with XT60 connector
- NEW! LED navigation lighting with LED control board (no more bare leads)
- NEW! Flaps and flap servos are now pre-installed and fully operational
- Servoless electronic retractable main landing gear for scale appearance and more aerodynamic flight
- Realistic scale features including WWII US Army scheme, hand painted pilot figure, gun turrets, and molded panel lines
- Powerful BM3715A-KV890 Brushless Outrunner motor
- Scale 3-blade propeller
- Dynam P-51D Mustang V2 1200mm (47") Wingspan - Receiver Ready
- Tomcat Skylord 30 Amp ESC with XT60 connector, servos, and motor come pre-installed for your convenience
- Decal set
- 5 Channel Radio - Select a minimum 5 channel radio from our Radio Collection
- 5 Channel Receiver - Select a minimum 5 channel receiver from our Receiver Collection
- 3 Cell 11.1V 2200 mAh LiPo Battery with XT60 connector - EPR22003X6
- 3 Cell Compatible Battery Charger - Select a minimum 3 cell (3S) charger from our Charger Collection
1200mm / 47in
1045mm / 41in
1100g / 38.8oz
|CG (Center of Gravity)||70 - 75mm from the leading edge at the wing root|
BM3715A-KV890 Brushless Outrunner Motor
Electronic Speed Control
30A Brushless with XT60 connector
Propeller / EDF
4-Blade Scale Prop
4x 9g standard
|Landing Gear||Retractable main landing gear|
3S 11.1V 2200mAh 20C LiPo with XT60 connector (required)
5 Channel (required)
|Build Time||2 Hours|
Product Spare Parts
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
the standard ESC it comes with one handle a 4-cell lipo 2200. used throttle management I install a 60 amp ESC and I run a for and I run. A 4 cell2500 and man let me tell you that Mustang Halls *** Dynam did a good job on that break flaps and everything Dynam did a good job on that break flaps and everything bad *** Mustang
p 51- mustang. dynam
Beautiful plane went together easy flies with no problem like any plug-in play you got to fine-tune it no like sand in the front of the fuselage for Clarence overall Dynam did a real good job on it
Dynam P-51D Mustang V2 1200mm
Nice model but I do not like the elevator/flap mix........I installed separate servo for the flaps
Just got it in yesterday! Unboxed and everything was pristine. Great job motion! Think I'm gonna do a custom paint job before even assembling, perfect canvas for it being no stickers or markings other than the pre painted invasion stripes on the fuse and the yellow nose and rudder( which I plan on keeping ). Everything looks great so far and this is the V2 so it even came with 4 blade prop and spinner! Again great job Motion RC and Dynam!!!!
I doint know how you can rate this plane as any good first off all the control horns are made of plastic and why testing all the control all of them broke so had to switch all to nylon due not evan try to fly this plane befor you due this also the wing screws doint evan line up could not get a single one to line up pilot looks like came out of a jet surpose to be three blade prop and spinner got 4 blade prop and spinner doint know if that's a bidg deal are not need 7 chanel if warnt lights to work are due with out flaps which where already hooked up so went for 7 chanel to get the lights decales doint evan look like the ones shown on plans are on box no invasion stripes on wing so I would think twice befor buying this have not got to fly it yet carse still making repairs out of the box
dynam p_51d mustang v2 1200mm_pnp
i installed the a3lv2/3 gyro in this plane like one other persone wrote this baby flys like its on railes , its fun to fly and looks great. very easy to assemble and every thing works great, i fly on 3 cell pack and timer set for 6 minutes, gyro set at 35 percent it works well in all conditions thanks all the people at motion rc you people are great
This plane is awesome. I put a gyro reciever in it, and it flies like it is on rails. A real treat to fly, and at this price how could it get any better? The only cons I could find was it's a little underpowered with the three cell battery pack, however it will finish any maneuver without petering out in low to moderate winds. And the silver paint sucks it comes off with just the touch of you hand, and gets smeared all over everything. However the flight characteristics of this plane is so great you'll find these issues are minor at best. I would highly recommend it as A first war bird.
Bought about a month ago. Still have not flown this plane. Waste of money.
Only my second RC plane and 1st warbird
This plane is a blast! I would have crashed it by now without the gyro assist on the receiver. It makes landings soo much easier. Couple of things to consider. People say you can put a 4s battery on here as long as you cut vents for cooling...not true. I fried my esc in a few seconds with a 4s battery. Maybe it was just a bad esc?? Anyway I have a 50amp esc now and it flies great. Now Im not a great pilot yet so Ive had some rough landings(had to bend them back a few times) and 1 landing gear actually turns now so maybe not the most durable but I can still fly it despite the wheel turning direction. These planes have such light wing loading that I even threw a 3000mah 4s in it and it handles it no problem after carving some extra space out. Its alot of fun so if you are new to warbirds give this one a shot. Its alot of **** for the buck. I might order another pnp just use my 1st for spare parts. Like so many have said these wheels need more forward angle on them to prevent prop drags.