Blade 200 QX Quadcopter with SAFE™ Technology - BNF
This product is discontinued
Spare parts available below
Blade 200 QX Quadcopter with SAFE™ Technology - Bind-N-Fly (BNF) - BLH7780
Looking for the ultimate in sport quadcopter performance, look no further! The 200 QX is the little brother of the 350 QX and was designed with power in mind so you can not only carry a payload, but can have a blast with aerobatics too.
The 200 QX is the perfect blend of power and functionality, making it one of the most fun-to-fly products Blade has designed to date. Everything from the translucent body with internal lighting to the incredible power, the 200 QX is sure to please everyone who gets their hands on it!
New Firmware update, New Flight Modes. New Propellers. New Opportunities.
It's time to turn everything you know about the 200 QX on its head with the latest firmware update. The firmware update includes:
Stability Mode (Bailout) - White Status LED
This mode is similar to Stability Mode for upright flight. In this mode the throttle is offset to run only from 51% to 100%; at up to 50% throttle the 200 QX propellers will spin but remain at idle until the throttle is raised. This throttle curve helps prevent a pilot from accidentally flying into the ground when flipping out of inverted flight and back to an upright position.
3D Stagility - Purple Status LED
3D Stability Mode features a self-leveling characteristic that's active whenever a pilot releases the control sticks. Whether pilots are flying inverted or upright, the 200 QX will always self-level so pilots can learn inverted flight without fear of losing control while in 3D Stagility Mode. When flying in this mode, 0%–50% throttle is reversed thrust and 51%–100% is positive thrust.
3D Agility - Yellow Status LED
3D Agility Mode was designed for experienced pilots who have mastered inverted flight on 3D stagility mode. This mode is for anyone who has mastered inverted flight in all orientations and advanced pilots looking for a full 3D flying experience with no self-leveling. When flying in this mode, 0–50% throttle is reversed thrust; 51%–100% is positive thrust.
New Bind Procedure-
In order to activate the three new 200 QX in modes, pilots must first install the optimized sport or 3D propellers and then re-bind the model with left rudder.
While the update is free, in order to apply firmware pilots will need the 200 QX update cable and the appropriate blades for each new flight mode. When installed, these unlocked flight modes provide a whole new way to experience the 200 QX, including the ability to fly inverted and the opportunity to fly in full 3D. 3 Items are required to use the new flight modes:
- Blade update cable (BLH7840)
- Sport propellers for inverted flight (BLH7714) OR 3D propellers for advanced flight (BLH7715)
- We recommend upgrading the flight battery to an 800mAh 2S 30C LiPo (EFLB8002SJ30) in order to maximize flight times using the new props and flight modes
Link to firmware update: http://www.bladehelis.com/200QX/
- SAFE™ technology equipped
- Three flight modes
- High performance brushless motors
- Internal LED illumination for easy orientation and night flying
- Optional camera available separately
- Blade 200 QX Quadcopter with SAFE™ technology - (BNF)
- 800 mAh 2S 7.4V 20C Li-Po Battery
- 2S Li-Po Dc Charger with AC Power Supply
- Charger Adapter
- Propeller Nut Wrench
A 5+ channel DSM2 or DSMX-compatible transmitter (Click Here)
Main Rotor Diameter
4.45in / 113mm
Tail Rotor Diameter
5.59in / 142mm
5.59in / 142mm
3.54in / 90mm
Rotor Blade Length
Main Gear Ratio
Approximate Flight Time
Spektrum DX5 or higher CH transmitter
7.4V 2S 800mAh 20C LiPo battery (included)
Indoor / Outdoor