Dynam C-47 Skytrain Green V2 with Gyro 1500mm (59") Wingspan - RTF
Dynam C-47 Skytrain Green V2 with Gyro 1500mm (59") Wingspan - (Ready-To-Fly) - RTF - DY8931SRTF-GREEN
This is the new Stabilized Ready-To-Fly version. This model comes with the Detrum MSR66A 6CH 2.4Ghz Mini Receiver with iStone 6-Axis Gyro/ABS built in for auto-stabilization and recovery. For more information on the MSR66A click here. The Dynam C-47 Skytrain is a nice scale foam multi-engine representation of the military transport aircraft used extensively by the Allies in World War II and still used by various military to this day. The C47 shares the same body structure as the civilian model DC3. Powered by 2 brushless 1100Kv motors the C47 Skytrain is sure to impress at the local flying field. This RTF includes a GAVIN-6A 6-Channel 2.4GHz Transmitter, Detrum MSR66A 6-Channel 2.4Ghz Mini Receiver with iStone 6-Axis Gyro/ABS and 3S 11.1V 2200 mAh Li-Po battery.
- NEW! 6-Channel Mini Receiver with built in gyro to conveniently support auto stabilization and recovery
- Steerable tail wheel
- Nice scale looks available in Olive Drab with invasion stripe livery
- Powerful brushless 1100Kv motors
- Comes with decal set
- Easy to build and transport
- Dynam C-47 Skytrain Green 1500mm (59") Wingspan - RTF
- GAVIN-6A 6-Channel 2.4GHz Transmitter
- Detrum MSR66A 6-Channel 2.4Ghz Mini Receiver with iStone 6-Axis Gyro/ABS
- 3 Cell 11.1V 2200 mAh Li-Po battery
- 3 Cell LiPo Battery Charger
- Dual 30A ESCs with XT60 connectors, servos and motors come pre-installed for your convenience
- Nothing! Everything you need to fly is included in the box.
HELPFUL TIP: If you are new to RC we highly recommend that you read through our excellent RC resource known as our "Knowledge Blog". Jam packed with helpful information for beginners including articles, video and a glossary of common RC terms and much more. Click Here to go to our Knowledge Blog's Beginner Section. For further assistance, please do not hesitate to contact our Customer Support Team and one of our knowledgeable RC experts will be glad to assist you. Happy flying!
1500mm / 59in
980mm / 38.5in
1200g / 42oz
|CG (Center of Gravity)||N/A|
2x 1100kv Brushless Outrunner Motor
Electronic Speed Control
2x 30A Brushless with XT60 connector
Propeller / EDF
2x 3 blades
4x 9g standard
3S 11.1V 2200mAh LiPo with T connector (included)
6 Channel (included)
|Build Time||3+ Hours|
Product Spare Parts
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
- November 18, 2016 - For the RTF with gyro version make sure the included Detrum receiver/gyro is securely mounted to the fuselage before attempting to fly this airplane. The V2 now has steerable tail wheel.
If you need any additional assistance, please visit the Motion RC Help Center
Recently Viewed Products
This was a great purchase. Easy to assemble. Have not flown it yet.
all good but paint
Nice Plane - assembly needs a little 'finessing'
SHIPPING - GOOD Arrived days before expected delivery date. PACKAGING - GOOD Double thick cardboard, compartementalized, multiple sealed bags, very organized. INSTRUCTIONS - BAD small, dark pics, difficult to see. Skip the paper and watch the youtube videos (which also include tips and tricks). ASSEMBLY - NOT BAD Includes rubber cement and all screws and pieces. Takes a while to dry, but works. RTF - basic transmitter - comes with instructions, no batteries - works well, no range problems. SUGGESTIONS: Check hinges for ease of movement, elevator was super stiff, didn't get full range of movement - check control rods, rudder rod was cut short by 2mm, jury-rigged it with the spare clamps and a paper clip until I could purchase correct length - check your control surfaces once powered up, all of the inputs on the receiver were incorrectly labelled - be careful with tail wheel, the 'keyed' part of the shaft was at the wrong angle, I had to clamp down on the round portion of the shaft to keep it straight - recommend using a rubber band and the soft sponges on the propshafts stacked one-on-the-other to keep the fore section of the tail down while gluing it likes to pop up - purchase sticky-back velcro tape, they taped the wrong side of the battery on mine, it fits snug, but not all batteries will - try to find brass spinners, the aluminum ones are nice, but the CG is just barely in range, very tail heavy, I plan on carving more space forward in the nose to move battery even futher forward. FLIGHT - NOT BAD Plane feels like flying a pillow - not for gusty weather - opposite rudder in turns keeps the wings from dipping, very quick to drop a wing in a turn - purchase more props and propshafts/motors if flying in grass, they're the first to go! PAINT JOB - GOOD two tone with military stripes decals go on nicely - would be nice if there were some instructions with the decals - numbers but no diagram of where to put them.