Cart Preview

Dynam DHC-2 Beaver 1500mm (59") Wingspan - PNP (SD)

Brand: Dynam /
$ 179.00 Regular price $ 139.00
Status:
notify me when back in stock
Share:
DY8961(SD)

Dynam DHC-2 Beaver 1500mm (59") Wingspan - PNP - DY8961

Scratch and Dent Details:
  • Product condition: Factory New
  • Missing parts: None
  • Damage/defects: The very end of the fuselage (tail section) is broken off (about a 3" piece). It's a clean break that will be easy to repair with CA or epoxy.
Please Note: Because of their deeply discounted prices, scratch and dent items cannot be returned or exchanged even if more is discovered to be found wrong beyond what was reported.


The de Havilland Canada DHC-2 Beaver is a single-engined, high-wing, propeller-driven, STOL aircraft developed by de Havilland Canada, primarily known as a bush plane. It is used for cargo and passenger hauling, aerial application (crop dusting and aerial topdressing), and has been widely adopted by armed forces as a utility aircraft. The United States Army purchased several hundred; nine DHC-2s are still in service with the U.S. Air Force Auxiliary (Civil Air Patrol) for search and rescue. The Beaver was designed for flight in rugged and remote areas of the world. Its short takeoff and landing capability made it ideal for areas normally only accessible by canoe or foot. Because it often flies to remote locations, often in cold climates, its oil reservoir filler is located in the cockpit and oil can be filled in flight.

Take to those rugged lakes and ponds close to your personal wilderness with Dynam's 1500mm (59") PNP DHC-2 Beaver! All you need is a 5 channel radio, 5 channel receiver and 4S 14.8V 2200mAh Li-Po battery and you're ready to master those water-based environments less traveled! Or if you prefer land-based operation, the DHC-2 Beaver also comes with landing gear.

Features:

  • Realistic scale features including DHC-2 paint scheme and molded panel lines
  • Set of floats with operational rudders for water takeoffs/taxiing and landings
  • Powerful BM3720A-KV650 Brushless Outrunner motor
  • Fixed landing gear included for land-based operation
  • LED navigation lights add scale realism and help make the plane more visible during dawn and dusk flights

Includes:

  • Dynam DHC-2 Beaver 1500mm (59") Wingspan - Receiver Ready
  • ESC with T connector, servos and motor come pre-installed for your convenience
  • Set of floats with operational rudder
  • Set of regular landing gear

Requires:

  • Minimum 5 Channel Radio - Click Here for recommendations
  • 5 Channel Receiver - Click Here for recommendations
  • 4 Cell 14.8V 2200 mAh LiPo Battery - Click Here for recommendations
  • Lipo Battery Charger - Click Here for recommendations
Skill Level: IntermediateArrow.jpgBuild Time: 3+ HoursAge Level: 14 and upArrow_End.jpg
FEATURE VIDEO: Dynam DHC-2 Beaver 1500mm (59") Wingspan - PNP Flight Review from Motion RC

Wingspan

1500mm / 59.06in

Length

958mm / 37.7in

Flying Weight

1400-1750g / 49.4-61.8oz

CG (Center of Gravity) 45 - 50mm from the leading edge at the wing root

Power System

BM3720A-KV650 Brushless Outrunner Motor

Electronic Speed Control

50A Brushless with T connector

Propeller / EDF

2-Blade Prop

Servos

5x 9g standard

Landing Gear Floats and Fixed

Required Battery

4S 14.8V 2200mAh 25C LiPo (required)

Required Radio

5 Channel (required)

Ailerons Yes

Elevator

Yes

Rudder Yes

Flaps

Optional (requires 1 forward and 1 reverse 9g servo)

Lights

Yes

Hinge Type

Foam

Material EPO Foam
Skill Level Intermediate
Build Time 2-3 Hours
Recommended Environment Outdoor
BONUS VIDEO: Dynam ESC Setup Timing and Programming from Motion RC
/dy-1500-beaver/

Product Specifications:

AGE LEVEL : 14 and up
SKILL LEVEL : Intermediate
BUILD TIME : 3+ Hours

Wingspan

1500mm / 59.06in

Length

958mm / 37.7in

Flying Weight

1400-1750g / 49.4-61.8oz

CG (Center of Gravity)45 - 50mm from the leading edge at the wing root

Power System

BM3720A-KV650 Brushless Outrunner Motor

Electronic Speed Control

50A Brushless with T connector

Propeller / EDF

2-Blade Prop

Servos

5x 9g standard

Landing GearFloats and Fixed

Required Battery

4S 14.8V 2200mAh 25C LiPo (required)

Required Radio

5 Channel (required)

AileronsYes

Elevator

Yes

RudderYes

Flaps

Optional (requires 1 forward and 1 reverse 9g servo)

Lights

Yes

Hinge Type

Foam

MaterialEPO Foam
Skill LevelIntermediate
Build Time2-3 Hours
Recommended EnvironmentOutdoor

Product Videos

Product Reviews

Product Questions & Answers

Top