-
Overview
-
Videos
-
Q&A
-
Support
Overview
Videos
Q&A
Support
Overview
Dynam Gee Bee Y 1270mm (50") Wingspan - PNP - DY8955PNP
The Gee Bee Model Y Senior Sportster was a sports aircraft built in the United States in the early 1930s by the Granville Brothers. Essentially an enlarged two-seat version of the single-seat Sportster, it was a low-wing strut-and-wire-braced monoplane of conventional—if short-coupled—design with open cockpits and fixed tailskid undercarriage. The first of the two examples constructed was built for the Granville Brothers company itself and served as a support aircraft for the R-1 and R-2 racers and also for competition in its own right.
Dynam's Gee Bee Y PNP is ready for the all the races and barnstorming you can imagine! All you need is a 4 channel radio, 4 channel receiver and 3S 11.1V 2200 mAh Li-Po battery and you're ready for a hair-raising, thrill-inducing ride!
Features:
- Realistic scale features including attractive Gee Bee Y paint scheme, hand painted pilot figure and molded panel lines
- Powerful BM3715A-KV1050 Brushless Outrunner motor
Includes:
- Dynam Gee Bee Y 1270mm (50") Wingspan - Receiver Ready
- ESC with T connector, servos, and motor come pre-installed for your convenience
- Decal set
Requires:
- 4 Channel Radio - Select a minimum 4 channel radio from our Radio Collection
- 4 Channel Receiver - Select a minimum 4 channel receiver from our Receiver Collection
- 3 Cell 11.1V 2200 - 2600 mAh LiPo Battery with T connector - EPR26003 recommended
- 3 Cell Compatible Battery Charger - Select a minimum 3 cell (3S) charger from our Charger Collection
Product Specifications:
Wingspan | 1270mm / 50in |
Length | 980mm / 45.8in |
Flying Weight | 1250g / 49.5oz |
| CG (Center of Gravity) | 50-55mm from the leading edge at the wing root |
Power System | M3715A-KV1050 Brushless Outrunner motor |
Electronic Speed Control | 40A Brushless with T connector |
Propeller / EDF | 2-Blade Prop |
Servos | 4x 9g standard |
| Landing Gear | Static |
Required Battery | 3S 11.1V 2200 - 2600 mAh LiPo (required) |
Required Radio | 4 Channel (required) |
| Ailerons | Yes |
Elevator | Yes |
| Rudder | Yes |
Flaps | No |
Lights | No |
Hinge Type | Foam |
| Material | EPO Foam |
| Skill Level | Intermediate |
| Build Time | 2-3 Hours |
| Recommended Environment | Outdoor |
Videos
Product Videos
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Support
Product support
Product Manuals:
If you need any additional assistance, please visit the Motion RC Help Center
Customer Reviews
-
Overview
-