Dynam Hawk Sky V2 with Gyro 1370mm (53") Wingspan - RTF
Dynam Hawk Sky V2 with Gyro 1370mm (53") Wingspan - RTF - DY8925SRTF
This is the new Stabilized Ready-To-Fly version. This model comes with the Detrum MSR66A 6CH 2.4Ghz Mini Receiver with iStone 6-Axis Gyro/ABS built in for auto-stabilization and recovery. For more information on the MSR66A click here.
The Dynam Hawk Sky brushless powered glider is great for beginners. Constructed of durable EPO foam, only a small amount of assembly is required for this Ready-To-Fly (RTF) glider. Powered by a 400 brushless motor which will get you in the air with little effort. Thanks to the 4 channel 2.4Ghz radio, Detrum RX67 7-Channel 2.4Ghz Mini Receiver, a LiPo battery charger and AC adapter which are all included, all that is required is a 3 Cell 11.1 volt 2200mAh LiPo battery to take to the skies.
Tech Note: Make sure the included Detrum receiver is securely mounted to the fuselage before attempting to fly this airplane.
- NEW! 6-Channel Mini Receiver with built in gyro to conveniently support auto stabilization and recovery
- Landing gear that is easily removable for hand tosses and grass landings
- Aileron, rudder and elevator controls
- Powerful 400 Brushless motor
- Dynam Hawk Sky V2 with Gyro 1370mm (53") Wingspan - Ready To Fly
- Detrum RX67 7-Channel 2.4Ghz Mini Receiver
- ESC with T connector, servos and motor come pre-installed for your convenience
- 4 channel 2.4Ghz radio
- LiPo battery charger with AC adapter
- Decal set
- 3 Cell 11.1V 2200 mAh LiPo Battery with T connector - EPR22003
HELPFUL TIP: If you are new to RC we highly recommend that you read through our excellent RC resource known as our "Knowledge Blog". Jam packed with helpful information for beginners including articles, video and a glossary of common RC terms and much more. Click Here to go to our Knowledge Blog's Beginner Section. For further assistance, please do not hesitate to contact our Customer Support Team and one of our knowledgeable RC experts will be glad to assist you. Happy flying!
1370mm / 53in
917mm / 36.1in
600g / 21.16oz
|CG (Center of Gravity)||58-62mm from the leading edge of the wing at the root|
KV400 Brushless Motor
Electronic Speed Control
25A Brushless with T connector
Propeller / EDF
3x 9g standard
3S 11.1V 2200mAh LiPo (required)
4 Channel 2.4Ghz (included)
|Build Time||15 minutes or less|
Product Spare Parts
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
- Reviews (4)
- Questions (1)
Great intermediate plane
Easy to fly and the ability to increase sensitivity once you’ve practiced some.
Good in some ways bad in others
The wings kit did not install together as expected as the rod that inserts into them simply will not fit. There is no easy way to fix this. I don't know what other people would do but I was able to get a pc of drill rod that was the right diameter and use that. The motor is mounted at a downward angle and does not produce airflow that allows the elevator to function properly at take off. The elevator works once you are airborne and are up to speed but not while landing or take off. My fix was to add additional 3/4 " length to the elevator. The thing is fast and once up to speed, it's touchy to control. Not for a beginner at all. The wings are retained by some crazy connectors that are secured to the styrofoam with one layer of sticky backed tape. This arrangement is of poor design and will fail and allow the wing to come off in flight. The location of the center of gravity is very narrow and will lead to uncontrolled crashes if not attended to. This has to do with the airfoil design and so it is not adjustable.
is veryyyy goood.........!
motion needs to carry the dynam gee bee p47 and AT6