Dynam Supermate 4 50W 4 Cell (4S) AC/DC LiPo Battery Charger
Dynam 50 Watt / 3A LiPo Balance Charger for 2S-4S Batteries - DY-DTM-C001
The Dynam LiPo Balance Charger can charge and balance 2 Cell, 3 Cell and 4 Cell LiPo batteries.
- 2-4 Cell LiPo Balance Charger
- Charge cable with XT60-Connector
- 18V 3A AC Power Supply - We recommend Detrum Supermate
Charge Circuit Power (AC Input)
Charge Circuit Power (DC Input)
|Charge Current Range|
|Max Charge Current|
2S LiPo: 1.0A
|Discharge Current Range||1.0A|
|Pb (Lead Acid) Battery Voltage||N/A|
|Dimensions (L x W x H)||84 x 53 x 27mm (3.30 x 2.0 x 1.0 in)|
|Weight||55g (0.12 lbs)|
Product Spare Parts
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
- Reviews (4)
- Questions (0)
My 1 year old charger wasnt "filling them up" so to speak. This charger does a great, quick charge and never overheats like my others.Now I didnt read the fine print, "does not come with charging 110v cord" , my fault, but still worth it.
Dynam supermate 4 Lopo balance charger
This is the second charger that was sent to me and it still does not work. The power light does not light up like the instructions list. The status light flashes red and then goes out when you plug in the battery to be charged. I will have to bring this problem up with the flying club and see if anyone else is having this problem if they purchased this item.
We regret that you had a negative experience with a Motion RC Product or service. Please contact our customer service team for further assistance. You can call, chat, or email by clicking on the following link: [Motion RC Contact Info](https://www.motionrc.com/pages/contact)
This charger should come with an adequate 12-14 volt charge lead for DC source power.
DYNAM 30W LIPO BALANCE CHARGER FOR 2S-4S BATTERIES
I have two of these charging systems (charger and 120V transformer). They work just fine. Nothing to improve in my estimation. To keep things easy for me I mounted both to a board.