Cart Preview

Dynam Turbo Jet Twin 64mm EDF Jet - PNP (SD)

Brand: Dynam /
$ 169.00 Regular price $ 119.00
Status:
notify me when back in stock
Share:
DY8937VII(SD)

Dynam 550 Turbo Jet Twin 64mm EDF Jet 1180mm (46") Wingspan with Electronic Retracts and Optional Flaps - PNP - DY8937VII

Scratch and Dent Details:
  • Product condition: Customer Return
  • Missing parts: None
  • Damage/defects: Tail on the fuselage is slightly crushed.
Please Note: Because of their deeply discounted prices, scratch and dent items cannot be returned or exchanged even if more is discovered to be found wrong beyond what was reported.


The Dynam Turbojet is modeled after the famous Citation II Model 550, which was a direct development from the Citation I. The earlier aircraft's success in the market led the manufacturer to believe there was demand for a larger aircraft that utilized the same design philosophy. The result was the Citation II, which had a maximum seating capacity of 10. In addition to more seats, the plane had more powerful JT15D-4 engines (2,500 lbf (11 kN) thrust per engine), increase of fuel capacity to approximately 5000 lbs, faster speeds and longer range. Dynam's 550 Turbo Jet Twin 64mm EDF PNP is virtually ready to fly! All you need is a 4 channel radio, 4 channel receiver and 3S 11.1V 2200 mAh Li-Po battery and you're ready to fly this scale business jet! This upgraded version includes electronic retractable landing gear and has cut-outs for optional flaps.

Tech Note: The electronic retracts on this Dynam airplane "may" function intermittently in temperatures below 50 degrees Fahrenheit. If you are flying in colder weather we strongly recommend flying your Dynam airplane with the gear deployed. We have notified Dynam of this issue, and they are working on a solution.

Features:

  • Servoless electronic retractable landing gear for scale appearance and more aerodynamic flight
  • Wings include cut-outs and hinge hardware for optional flaps (two 9g servos required) which allow shorter take-offs and slower landings
  • Realistic scale features including attractive 550 Turbo Jet graphics package, simulated de-icing boots and molded panel lines
  • Powerful BM2815D-KV3600X Twin EDF motors and 64mm electronic ducted fan units

Includes:

  • Dynam 550 Turbo Jet Twin 64mm EDF Jet 1180mm (46") Wingspan - Receiver Ready
  • ESCs with T connector, servos, electronic retracts, and EDFs pre-installed for your convenience
  • Decal set

Requires:

  • 5+ Channel Radio - Click Here for recommendations
  • 5+ Channel Receiver - Click Here for recommendations
  • 3 Cell 11.1V 2200 mAh LiPo Battery - Click Here for recommendations
  • Lipo Battery Charger - Click Here for recommendations

Skill Level: Intermediate Build Time: 3-4 Hours Recommended Age: 14 and up

Tech Note: The main wing spars installed in the Dynam Turbo Jet are more than sufficient for scale flying and moderate acrobatics. If you plan on flying the Turbo jet aggressively (dive bombing, hard pull-ups, etc.) we recommend that you install additional, longer spars to provide added support for the main wing.

FEATURE VIDEO: Dynam Turbo Jet Twin 64mm EDF Jet Feature Overiew and Flight Demo. Shown in White Color Scheme

Wingspan

1180mm / 46in

Length

1080mm / 42.51in

Flying Weight

1150g / 40.56oz

CG (Center of Gravity) 55 - 60mm from the leading edge at the wing root

Power System

2x BM2815D-KV3600X EDF Motors

Electronic Speed Control

2x 40A Brushless with T connector

Propeller / EDF

2x 64mm EDF

Servos

4x 9g standard

Landing Gear Servoless E-retracts with wire landing gear

Required Battery

3S 11.1V 2200mAh 20C LiPo (required)

Required Radio

5+ Channel (required)

Ailerons Yes

Elevator

Yes

Rudder Yes

Flaps

Optional (requires 1 forward and 1 reverse 9g servo)

Lights

No

Hinge Type

Foam

Material EPO Foam
Skill Level Intermediate
Build Time 2 Hours
Recommended Environment Outdoor
Build Video: Dynam Turbojet Model Build from Motion RC

BONUS VIDEO: Dynam ESC Setup Timing and Programming from Motion RC
/dy-64-turbojet/

Product Specifications:

Wingspan

1180mm / 46in

Length

1080mm / 42.51in

Flying Weight

1150g / 40.56oz

CG (Center of Gravity)55 - 60mm from the leading edge at the wing root

Power System

2x BM2815D-KV3600X EDF Motors

Electronic Speed Control

2x 40A Brushless with T connector

Propeller / EDF

2x 64mm EDF

Servos

4x 9g standard

Landing GearServoless E-retracts with wire landing gear

Required Battery

3S 11.1V 2200mAh 20C LiPo (required)

Required Radio

5+ Channel (required)

AileronsYes

Elevator

Yes

RudderYes

Flaps

Optional (requires 1 forward and 1 reverse 9g servo)

Lights

No

Hinge Type

Foam

MaterialEPO Foam
Skill LevelIntermediate
Build Time2 Hours
Recommended EnvironmentOutdoor

Product Videos

Product Reviews

Product Questions & Answers

Top