Dynam Waco Red 1270mm (50") Wingspan - PNP
Dynam Waco Red 1270mm (50") Wingspan - PNP - DY8952PNP-RED
The Dynam Waco Bi-Plane offers an appealing combination of performance, style and affordability. Designed using the latest technology in durable EPO foam providing lightweight and structural rigidity. The result is an aircraft that offers awesome levels of performance. This bi-plane spans its wings at 50 inches and sits at an overall length of almost 39 inches. The large prop is thrown by a BM3720A-650KV brushless motor supported by a Dynam 40A electronic speed controller. Control surfaces are handled by four 9 gram Detrum servos and includes a steerable tail wheel for easy taxing around the runway. Requires a 14.8V 2200mah Li-Po Battery, 4 channel radio and receiver. When more power is needed during sports aerobatic flying the Detrum power system delivers it effortlessly and smoothly. An easy access hatch allows for quick battery changes without having to remove the wings. The power plant and scale like features allow this plane to fly gracefully with outstanding flight characteristics.
Visit the Official Dynam Waco Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
- Highly scaled and attractive red paint scheme plus decal trim sheet
- Powerful BM3720A-KV650 Brushless Outrunner motor
- Dynam Waco Red 1270mm (50") Wingspan - Receiver Ready - (PNP)
- ESC with XT60 connector, servos and motor come pre-installed for your convenience
- Decal set
- 4 Channel Radio - Select a minimum 4 channel radio from our Radio Collection
- 4 Channel Receiver - Select a minimum 4 channel receiver from our Receiver Collection
- 4 Cell 14.8V 2200 mAh LiPo Battery with XT60 connector - EPR22004X6
- 4 Cell Compatible Battery Charger - Select a minimum 4 cell (4S) charger from our Charger Collection
1270mm / 50in
983mm / 38.7in
|CG (Center of Gravity)||70-75mm from the leading edge of the top wing|
BM3720A-KV650 Brushless Outrunner Motor
Electronic Speed Control
40A Brushless with XT60 connector
Propeller / EDF
9g x 4
4S 14.8V 2200mAh LiPo (required)
4 Channel (required)
|Build Time||3+ Hours|
Product Videos(Video shows the yellow version)
Product Spare Parts
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
- November 18, 2016 - Do not use lock tite on the bolts that attach the wing struts to the wing. For the RTF version make sure the included Detrum receiver/gyro is securely mounted to the fuselage before attempting to fly.
If you need any additional assistance, please visit the Motion RC Help Center
Not impressed with Dynam airplanes
My Waco arrived promptly, that was the highlight of this purchase. Bad motor, bad servo and a missing part which keeps the lower wing attached to the fuselage. I contacted Motion and they responded promptly received a new motor and servo within days, but the wing attachment part needed was out of stock, they don’t know when they will have one, said could be months. I have an incomplete plane and don’t know when I will get the part, not impressed with Dynam will never order another of their product. Assembly directions are poor at best. I will order from Motion again. Their service is very prompt
Nice little airplane
Flies very scale on 3s 2200. Easy on batteries, 8 to 9 minutes gentle flight time. Mine needed considerable down trim with CG at 75mm. I put a little down thrust in motor; that helps at full throttle. Looks good with a light coat of clear varathane. No assembly issues, just time consuming. I don't mind that, I'm a kit builder. Quickly becoming my favorite aircraft.
Wonderful plane. Flyes as a dream.
Red Dynam Waco.
I found that arrived in great shape. Found NO damage or imperfections upon inspection. I had no fit problems. All went together well. I did a few modifications based on other reviews. Was glad to see that the upper wing lighting wires had the connectors them. That meant that I had to make the holes in the fuselage a little larger for the connectors to fit through. But that was easy and not a problem. It's a great plane. It has exceeded all my expectations. Thanks for taking good care of it in getting it to me.
The red looks great in the air.
Warped tail surfaces, no lock nuts for cabanes, and some dings to fill and paint. But, glad I chose this one. I found it to fly very well and had plenty of power. I programmed quite a bit more control surface throw after the first couple of flights. Speed control has worked well. I'm using 4s-3200 20c (ten years old) and 30c batteries. Suggested C.G. seems to work well for me and it lands well with about enough power to taxi. I have 8 flights so far and am well pleased. Thanks Motion RC.
dynam red waco 1270mm
rec. in fine con. nice kit have not had in air yet !!
Dynam Waco Red 1270mm (50") Wingspan - PNP
translate The model was very nicely made, unfortunately in my copy, there were no screws in the cover of the wheel chassis. A little oversight of Chinese. Big plus, I got a parcel in Poland in 3 days.To go on like this !!!, Z modelu jestem bardzo zadowolony ,bardzo ładny czerwony kolor !!!!
Waco 50 in.
I found my Waco to be in great shape when it arrived. I was really impressed with the packaging . No damage at all in shipment and no warped surfaces. The directions leave a lot to be desired though. If I wasn't a flyer for years I would have had more trouble figuring out which screws went where. I had it ready to fly in about 3 1/2 hours. The screwdriver that was supplied wasn't long enough to reach the screws that connected the tail to the fuselage . I am well satisfied with my purchase.