FMS 70A ESC with 5A SBEC
FMS 70A ESC with 5A SBEC and 200mm lead length - FMM70A200EC3
This ESC has a male XT60 connector for connecting to your LiPo battery pack and pre-soldered bullets for easy connection to your motor. The built in 5A SBEC (switched BEC) will provide power to the receiver, servos, lights, and retracts directly from your LiPo flight pack. This ESC is burstable to 80A for 10 seconds. Voltage provided from the ESC is 5.5V. This ESC weighs 79g and will work with a 2 cell to 6 cell LiPo. This ESC is fully programmable using your radio or a programming card. Size is 68mm x 37mm x 14mm
- Battery Type (LiPo, NiCd, NiMh
- Low voltage cutoff
- Restore to factory default
- Soft acceleration start up
- Governor mode
- Motor Rotation (Clockwise, Counterclockwise)
- Switching frequency
- Low voltage cutoff type (power reduction or immediate shutdown)
- Air ESC Programming Card for FMS and RocHobby ESCs - Click Here for Details
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
FMS esc 70 AmpPredator
the FMS esc 70 AmpPredator, Item PDZESC003 came with the EC5 connector which was not what I wanted. I had to return this item.
Spijtig dat we in Belgie douanekosten moeten betalen voor produkten uit USA.
FMS 70A ESC with 5A SBEC
Works Great right out of the box.
Replacement at no cost
The ESC received with a FMS Olympus did not work. I wrote MotionRC and without any further questions, another ESC was sent at no cost. Excellent service!
A good ESC - but no real braking function
This is the 2nd ESC - the first one still working fine, but wanted a backup as the other one I have is 2 years old. I don't push the limits, pulling a max of 60A when the battery is fully charges, so normally I pull 45A or so flying around at 60-70% throttle. The only issue I have with the ESC is it really has no brake. It's "on" or "off" and the on condition is for folding props, which just stops the prop - does not slow it down. That would be ideal (slowing it down) and not stopping it. Anyway, it's a good ESC and performs well.
Replacement ESC: FMS 70A with 5A SBEC
The original ESC malfunctioned during maiden. Ordered replacement and she runs great. Thanks Motion for your great customer service.
Be sure to test you ESC before the 30 days runs out
I didn't get my T-28 out until late this season after ordering it in spring. My ESC lasted ran well during my first flights last week. I was planning to make some adjustments (the cowl flap servos were reversed and some mechanical adjustments were required). I powered up the plane and the ESC burnt out immediately. Hoping the replacement works better.
Works like it should
The first esc was defective. Motion RC replaced it at no charge. The replacement is working perfectly.
for the price out there this two fms-esc-70-5a-sbec that i ordered from you are doing a great job thank's to mr:bradley.