Cart Preview

FMS F4U Corsair V3 6ch Blue 1400mm (55") Wingspan - PNP


This product is discontinued

Spare parts available below

Regular price 314.99 $31499 Free Shipping*

notify me when back in stock

1400mm FMS F4U-4 Corsair Version 3 in Navy Blue Color Scheme - Receiver Ready (PNP) - FMS024

The FMS Corsair has a new update as of 3/2014 - Updates include:

  • Superior FMS designed rotating retracts with complete metal trunnions, metal jack screw, metal stops on either side of the retract, and a thick and rugged plastic housing
  • 17g metal gear servos for ailerons, elevator, rudder, and flaps
  • 9g digital metal gear servos for the landing gear doors
  • 6 second sequencer for slower more scale landing gear operation
  • New 70A ESC with 5A SBEC
Northrop Grumman A-10

This FMS Corsair V3 is a huge upgrade over the prior version. This version includes upgrades such as triple flaps, landing lights, and a much larger battery compartment. This is one of the best looking most detailed Corsair models we've found. The new retracts are a HUGE improvement over the old version of the retract. This set has complete metal trunnions, metal jack screw, metal stops on either side of the retract, and a thick and rugged plastic housing. The micro switch is under the jack screw and trunnion as opposed to the old design where a hard landing could break the micro switch. This design includes channels to stop the trunnion from moving so it physically cannot move any farther during landing. We find these retracts to be a HUGE improvement over the old retracts. These retracts also operate at 1/2 the speed of the prior version so they open and close at a much more scale speed (about 6 seconds to open, 6 seconds to close). There is plenty of power from the upgraded motor in this FMS Corsair. We find the stock landing gear is up to the task of a grass field but Dave Brown tires are a nice upgrade for extra shock absorption.

What are the upgrades and differences between the 1400mm FMS Corsair V2 and 1400mm FMS Corsair V3

The first thing FMS did was enlarge the Corsair V3 battery hatch to make access much easier for many different LiPo battery sizes. The FMS Corsair V3 also now has scale 3 panel operational flaps which did not exist on the V2. V3 also has navigation and landing lights which were not present on V2. In addition FMS really enhanced the scale details on the FMS Corsair V3. This includes little details such as an aerial mast and antenna in addition to large details like a scale full width horizontal stabilizer. The FMS Corsair V3 also has a massively improved prop nut with a metal threaded insert as opposed to the all plastic in the version 2. The new V3 cowl is much improved. It is made of tough plastic and can easily be removed for servicing or upgrading the motor. The new tail wheel on the FMS Corsair Version 3 is not only much more detailed but it is also driven by the rudder servo. The V2 tail wheel was driven by its own servo which was prone to failure. This issue has been addressed and solved. The landing gear doors are now made of a thicker more resilient nylon while the old V2 doors were made of a thinner brittle plastic. Lastly the V3 includes scale rockets and drop tanks which are easy to add and removable if you want less drag or more scale.


  • Model offficially licensed by Northrop Grumman
  • Many scale details including oil tanks, rockets and detailed engine
  • Metal gear servos (no plastic gear servos in this plane
  • True to scale 90 degree rotating landing gear with metal trunnions and sequential retract doors
  • Three slow speed flaps on each wing for scale takeoffs and landings
  • Bright LED navigation lights and landing lights
  • Hand painted detailing including cockpit and pilot figure
  • Large 14x8 propeller powered by KV540 motor delivers plenty of power for high speed flying and aerobatics
  • Easy to assemble with almost no glue required
  • Detachable main wing for easy transportation in smaller vehicles
  • Durable EPO Foam


  • 6 Channel Radio - Click Here for recommendations
  • 6 Channel Receiver - Click Here for recommendations
  • 4 Cell 14.8V 3600 mAh Lipo Battery - EPR36004
  • Lipo Battery Charger - Click Here for recommendations

Product Specifications:

AGE LEVEL : 14 and up
SKILL LEVEL : Intermediate
BUILD TIME : 2 Hours


1400mm / 55.2in


1240mm / 49.0in

Flying Weight


Power System

4250-Kv540 Brushless Motor

Speed Control

70A ESC, Internal 5A SBEC, T Connector

Propeller / EDF

14x8 Four Blade Propeller


17gx6 metal gear, 9g×2 metal gear

Landing Gear

Electronic Retracts

Required Battery

14.8V 3600mAh 30C 4 cell LiPo

Required Radio

6 Channel









Hinge Type



EPO Foam

Product Videos

Product Questions & Answers

NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.

Product Reviews