Cart Preview

Freewing F/A-18C Hornet "Base Gray" High Performance 90mm EDF Jet - PNP

$56900

$56900

Freewing F/A-18C Hornet "Base Gray" High Performance 90mm EDF Jet - PNP

 | 
Regular price 569.00 $56900 Free Shipping*

Status: Only 8 left, order soon!

Available Product Formats (More Info)

Share:
FJ31423P(PG)

F/A-18C Hornet "Base Gray" with 9-Blade High Performance 90mm EDF Jet from Freewing - PNP - FJ31423P(PG)

Version Info: This is the High Performance version of the Freewing F/A-18C Hornet "Base Gray". This version includes a powerful 3672-1900Kv inrunner motor with new lightweight 9-blade fan, 130A ESC, upgraded 17g digital metal gear elevator servos and upgraded digital metal gear flap servos.

Over ten years ago, Freewing began developing their first American 90mm EDF, the F/A-18E Super Hornet. To celebrate Freewing’s Eleventh anniversary, we are proud to announce an all-new 90mm F/A-18C Hornet, complete with all the latest features common to modern era EDFs in our Super Scale series. Be sure to save a summer slot for the Freewing F/A-18C, the quintessential 90mm Hornet on the planet!

Visit the Official Freewing 90mm F/A-18C Hornet Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.

Features:

  • NEW! Lightweight 9-Blade factory balanced EDF combined with a powerful brushless 3672-1900Kv inrunner motor
  • NEW! Upgraded 17g digital metal gear elevator servos and upgraded 9g digital metal gear flap servos
  • NEW! Reinforced and improved elevator assembly process
  • This is not a V3, but a completely new design/variant from the ground-up
  • F/A-18C “Legacy”, the world’s first C variant 90mm PNP
  • 6S 5000-6000mAh lipo can easily achieve 4-5+ minutes of managed flight time (see our video in the video tab above)
  • Manufactured with durable and quality EPO foam, not EPS
  • Complete screw-together assembly without the need for any glue
  • Scale outline, including open vents between the fuselage and intakes, and downward angled wingtip rails never before seen in a foam F-18
  • Completely concealed elevator servos and elevator control hardware for less drag and clean scale outline
  • Full coverage plastic undercarriage doors
  • Aluminum suspension undercarriage
  • Trailing link struts
  • Low visibility rudder servo placement
  • Low visibility flap servo placement and geometry
  • All-new plastic Fowler flap arm hinges to mimic those on the real F-18
  • Removable plastic-tipped magnetic nose cone
  • Removable wings with QD wing harness
  • LED lighting on nose strut, chines, and dorsal
  • Large battery bay for battery, MFCB, and gyro
  • Sharp and shallow panel lines in sensible areas without reducing overall scale effect
  • Pre-molded wing station to accept Freewing’s MWS plastic slot system (aftermarket pylons, ordnance, 3DP, Runcam, etc)
  • Quick Service servo plates on the wings and vertical stabilizers (screws, not glue)
  • Plastic lined coaming to resist bubbling under the canopy
  • Plastic tipped nosecone, capped intake lips and wingtip rails with pre-installed MWS slot
  • Plastic nozzles with two-tone metallic paint job

Includes:

  • Freewing F/A-18C Hornet "Base Gray" High Performance 90mm EDF Jet - PNP
  • 9-Blade EDF power system (installed)
  • 3672-1900Kv inrunner brushless motor (installed)
  • 130A ESC with EC5 connector (installed)
  • Electronic retractable landing gear (installed)
  • Servos, LED Lights (installed)

Requires:

Product Specifications:

AGE LEVEL : 18 and up
SKILL LEVEL : intermediate
BUILD TIME : 3-4 hours

Model Scale

1 : 11 Scale

Wingspan

1034mm / 40.7in

Length

1500mm /59.05in

Empty Weight

2640g / 93.12oz (w/o battery)

CG (Center of Gravity)

88mm (3.4") from the leading edge of the wing at the root

Power System

6S 3672-1900Kv Brushless Inrunner Motor

Electronic Speed Control

130A, EC5 Connector

Propeller / EDF

90mm 9-Blade EDF

Servos 9g metal gear digital hybrid standard with 150mm lead : left rudder, right rudder, left flap, right flap
9g metal gear digital hybrid standard with 250mm lead : left aileron, right aileron
9g metal gear digital hybrid standard with 400mm lead : nose gear steering
17g metal gear hybrid with 100mm lead : right elevator
17g metal gear hybrid reverse with 100mm lead : left elevator

Landing Gear

Electronic retractable main gear and steerable nose gear with all metal shock absorbing struts

Required Battery

6S 22.2V 5000-6000mAh LiPo with EC5 connector (required)

Required Radio

6 Channel (required)

Ailerons

Yes

Elevator

Yes

Rudder

Yes

Flaps

Yes

Lights

Yes

Hinge Type

Nylon Reinforced

Material

EPO Foam

Skill Level

Intermediate/Advanced

Build Time

3-4 Hours

Recommended Environment

Outdoor, 150+ foot paved runway or short manicured grass

Product Videos

Product Spare Parts

Product Questions & Answers

NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.

Product Support

Product Manuals:

Product Updates:

 

If you need any additional assistance, please visit the Motion RC Help Center

Product Reviews

Top