Cart Preview

Freewing Pandora 4-in-1 Blue 1400mm (55") Wingspan - PNP

Brand: Freewing /
Regular price $ 199.00
Status:
Share:
FT30111P

Freewing Pandora 4-in-1 Blue 1400mm (55") Wingspan - PNP - FT30111P

The Freewing Pandora is not only one of the best beginner planes on the market, it is a great intermediate plane too. How is this possible? The Pandora ships as a high wing trainer. Simply change the canopy to the included low wing canopy and move the wings to the bottom of the fuselage and you now have a light sport low wing plane perfect for an intermediate pilot. In addition there are two sets of wheels. There is a set of tricycle landing gear which the Motion RC Pilots think looks best on the low wing plane, and there is a set of "Big Wheel" landing gear in tail dragger format which is perfect for grass and dirt takeoff/landing. The "Big Wheels" even work on tall thick grass with ease.

You literally have 4 combinations and can make 4 different planes. This is a fantastic concept which is very enjoyable to fly. The Pandora does not get knocked around by the wind as much as a smaller plane. Though it is recommended beginners do not fly in a lot of wind, this plane is easier than most to fly in a bit of wind because of the larger size and weight. The guys at Motion RC think the Freewing Pandora may quickly become the plane of choice for both beginner and intermediate pilots. This is one of the best performing, best built, best values in RC planes.

Note: Optional flaps are molded into the wings along with a pocket for the flap servos. Better yet, the hardware for the optional flaps is included. You only need two 9 gram servos to make the flaps fully operational in about 10 minutes. If you use one flap channel, you will need a Y cable, one forward 9g servo, and one reverse 9g servo. If you use two channels for flaps, you can use two forward 9g servos and reverse one channel using your radio. If you need any help picking servos, the guys at Motion RC are happy to help.

Be sure to click the "Videos" tab above to see many more videos including the Pandora flying in the snow with Skis.

Features:

  • High wing and low wing configuration included in one plane
  • Tricycle landing gear and tail dragger landing gear included
  • Included BIG wheels for tall grass takeoff and landings
  • Molded wing pocket for optional flap servos - push rods and linkage included
  • Durable EPO foam construction
  • Nylon hinges on all control surfaces
  • Brushless motor, ESC, and 4 micro servos installed

Requires:

  • 4-6 Channel Radio - Click Here for recommendations
  • 4-6 Channel Receiver - Click Here for recommendations
  • 3 Cell 11.1V 2200 mAh Lipo Battery - EPR22003
  • Lipo Battery Charger - Click Here for recommendations

Product Specifications:

AGE LEVEL : 14 and up
SKILL LEVEL : Beginner +
BUILD TIME : 1 Hour

Wingspan

1400mm/55.1in

Length

1180mm/46.5in

Flying Weight

1500g / 53 ounces

Power System

Brushless 3536-800Kv

Speed Control

30A, Internal BEC, T connector

Propeller / EDF

11x6 3 blade prop

Servos

9g standard with 300mm lead : left flap, elevator
9g reverse with 300mm lead : right flap
9g standard with 550mm lead : left aileron, right aileron
17g standard standard with 300mm lead : rudder

Landing Gear

Fixed tricycle or tail dragger. Small or large wheels

Required Battery

11.1V 2200mAh 25C 3 cell LiPo

Required Radio

4 Channel

Rudder

Yes

Flaps

Optional -molded servo area and flap cut outs

Ailerons

Yes

Lights

No

Hinge Type

Nylon hinges on all control surfaces

Material

EPO Foam

Product Videos

Product Spare Parts

Product Reviews

Product Questions & Answers

Top