Cart Preview

Freewing Pandora 4-in-1 Red 1400mm (55") Wingspan - PNP (SD)

Brand: Freewing /
$ 174.99 Regular price $ 134.99
Status:
notify me when back in stock
Share:
FT30121P(F4301B)(SD)

Freewing Pandora Interchangeable multi-combination RC Plane(Four Planes-in-One), Receiver Ready, Red Color

Scratch and Dent Details:
  • Product condition: Factory new, open box
  • Missing parts: Upper wing screw down block in fuselage. This is the plastic piece that is molded into the fuselage and the main wing gets screwed in to. A piece of wood or similar material can be installed in the fuselage to accept the screws from the main wing or you can simply use this as a low wing model.
  • Damage/defects: None, this plane is simply missing the plastic part mentioned above.
Please Note: Because of their deeply discounted prices, scratch and dent items cannot be returned or exchanged.


The Freewing Pandora is not only one of the best beginner planes on the market, it is a great intermediate plane too. How is this possible? The Pandora ships as a high wing trainer. Simply change the canopy to the included low wing canopy and move the wings to the bottom of the fuselage and you now have a light sport low wing plane perfect for an intermediate pilot. In addition there are two sets of wheels. There is a set of tricycle landing gear which the Motion RC Pilots think looks best on the low wing plane, and there is a set of "Big Wheel" landing gear in tail dragger format which is perfect for grass and dirt takeoff/landing. The "Big Wheels" even work on tall thick grass with ease. You literally have 4 combinations and can make 4 different planes. This is a fantastic concept which is very enjoyable to fly. The Pandora does not get knocked around by the wind as much as a smaller plane. We don't recommend beginners fly any RC plane in a lot of wind but this plane is easier than most to fly in a bit of wind because of the larger size and weight. The guys at Motion RC think the Freewing Pandora may quickly become the plane of choice for both beginner and intermediate pilots.

NOTE: Optional flaps are molded into the wings along with a pocket for the flap servos. Better yet, the hardware for the optional flaps is included. You only need two 9 gram servos to make the flaps fully operational in about 10 minutes. If you use one flap channel, you will need a Y cable, one forward 9g servo, and one reverse 9g servo. If you use two channels for flaps, you can use two forward 9g servos and reverse one channel using your radio. If you need any help picking out servos for the flaps, the guys at Motion RC are happy to help.

Be sure to click the "more videos" tab above to see many more videos including the Pandora flying in the snow with Skis.

Features

  • High wing and low wing configuration included in one plane
  • Tricycle landing gear and tail dragger landing gear included
  • Included BIG wheels for tall grass takeoff and landings
  • Molded wing pocket for optional flap servos - hardware and push rods are included
  • Durable EPO foam construction
  • Nylon hinges on all control surfaces
  • Brushless motor, ESC, and 4 micro servos installed

Requires

  • 4-6 Channel Radio - Click Here for recommendations
  • 4-6 Channel Receiver - Click Here for recommendations
  • 3 Cell 11.1V 2200 mAh Lipo Battery - EPR22003
  • Lipo Battery Charger - Click Here for recommendations

Skill Level: Beginner Build Time: 1 Hour Recommended Age: 14 and up

canada-flat-icon.png Canadian Customers: This product is too large to ship via US Postal Service. You MUST select UPS for shipping method during checkout.

FEATURE VIDEO: Flight Demonstration of the Freewing Pandora in Blue Using High Wing, Big Wheels, and Tail Wheel Confguration

Wingspan

1400mm/55.1in

Length

1180mm/46.5in

Flying Weight

1500g / 53 ounces

Power System

Brushless 3536-800Kv

Speed Control

30A, Internal BEC, T connector

Propeller / EDF

11x6 3 blade prop

Servos

Ailerons: 9g standard with 550mm lead
Elevator: 9g standard with 300mm lead
Rudder: 17g standard with 300mm lead
Flap Left: 9g standard with 300mm lead
Flap Right: 9g reverse with 300mm lead

Landing Gear

Fixed tricycle or tail dragger. Small or large wheels

Required Battery

11.1V 2200mAh 25C 3 cell LiPo

Required Radio

4 Channel

Rudder

Yes

Flaps

Optional -molded servo area and flap cut outs

Ailerons

Yes

Lights

No

Hinge Type

Nylon hinges on all control surfaces

Material

EPO Foam

CONFIGURATION #1: Flight Demonstration of the Freewing Pandora using High Wing, Big Wheels, and Tail Wheel

CONFIGURATION #2: Flight Demonstration of the Freewing Pandora Using Low Wing, Big Wheels, and Tail Wheel

CONFIGURATION #3: Flight Demonstration of the Freewing Pandora Using Low Wing and Tricycle Gear

CONFIGURATION #4: Flight Demonstration of the Freewing Pandora Using High Wing and Tricycle Gear

FEATURE VIDEO: Flying the Pandora in the snow
/fw-1400-pandora/

Product Specifications:

Wingspan

1400mm/55.1in

Length

1180mm/46.5in

Flying Weight

1500g / 53 ounces

Power System

Brushless 3536-800Kv

Speed Control

30A, Internal BEC, T connector

Propeller / EDF

11x6 3 blade prop

Servos

Ailerons: 9g standard with 550mm lead
Elevator: 9g standard with 300mm lead
Rudder: 17g standard with 300mm lead
Flap Left: 9g standard with 300mm lead
Flap Right: 9g reverse with 300mm lead

Landing Gear

Fixed tricycle or tail dragger. Small or large wheels

Required Battery

11.1V 2200mAh 25C 3 cell LiPo

Required Radio

4 Channel

Rudder

Yes

Flaps

Optional -molded servo area and flap cut outs

Ailerons

Yes

Lights

No

Hinge Type

Nylon hinges on all control surfaces

Material

EPO Foam

Product Videos

Product Spare Parts

Product Reviews

Product Questions & Answers

Top