Freewing Rebel V2 Fuselage
FJ2051101
Fuselage for the Freewing Rebel V2 70mm EDF Jet - FJ2051101
Note: The nose cone is included with this fuselage.
Note: The nose cone is included with this fuselage.
I wish I did not need this, but a bad servo lead required me to buy this. It was very easy to take the parts from the crash and reassemble on the new fuselage. It fly's just as good as before. Motion RC is the Greatest they will continue to get my RC business.
When I tore the nose off my Rebel as the result of a poor landing my first thought was to get out the Foam-Tac and glue her back together but new it would never be perfectly straight again and decided to just buy the new fuselage. When I received it I was pleasantly surprised to find that it came with the tail nozzle, nose cone, nose gear plastic frame and the already applied decals. If that wasn't enough the servo extension wires for the rudder and elevator are also installed and ready to go. The time it took to swap out the fuse may have been a little longer than a glue repair but now it looks like new again and it won't break your wallet in the process!
I almost lost the rudder in the first flight. The rudder attaches with several screws to plastic housing. The plastic housing came loose during the first flight. I glued it down with better glue. Works fine now. The canopy cover does not catch both magnets. I use tape on every flight because I am afraid it will fly off at high speed. I have 3 lights on this model and the 12als are already peeling off.
Like the other person said, it came with the nose cone cap, the canopy, and the silver glue on piece for the thrust tube and all the waterslide 12als applied. It also comes with the plastic cover for the front landing gear and the servo extensions for the rudder and elevator are installed. Looks as good as the original, came packed excellent, no damage.