FrSky Horus X10S 16-Channel Transmitter - Carbon Fiber
Horus X10S 16-Channel Transmitter - Carbon Fiber from FrSky - FRSHORUSX10S
FREE R9M MODULE WITH PURCHASE!*The R9M module will be shipped with the radio. No need to add to your cart.
Motion RC is happy to offer our customers FrSky transmitters which offer impressive cost savings without compromising quality and features.
The FrSky Horus X10 and X10S are the latest transmitters to join the FrSky family. They both carry on all of the features of their predecessor’s and each model has its own unique advantages.
The X10 series carries forward all the advantages of its big brother the X12S, the X10 and X10S have the built-in iXJT+ module, detachable external antenna, and an industrial LCD screen. Comes with FrSky’s own easy to use FrOS (operating system) and of course, supports OpenTX as well. The X10 series also inherits the wireless trainer system, antenna detection and SWR warning functions. Designed with 2 internal antennas to improve signal strength and improved battery life with a rechargeable Li-ion battery.
The two main differences between the X10 and X10S are the Horus X10 has M10 hall sensor gimbals with adjustable sticks. The Horus X10S is equipped with our latest and best gimbal to date, the MC12P has all CNC digital higher accuracy 10 ball bearing hall sensor Gimbals than MC12 gimbal of the X12S. These gimbals offer the most precise control for your flying experience.
Important: FrSky radios and the FR Operating System are very capable, but they can be challenging to setup, even for experienced hobbyists. If you demand the ultimate in radio customization and you don't mind spending a couple of evenings to learn the FrSky operating system, then FrSky radios are a great choice. However, if you prefer a radio transmitter with a more traditional, simplified user interface, we suggest you consider Detrum GAVIN or Spektrum brands radios.
Click Here for a comprehensive video series covering all you need to know about programming your FrSky radio.
- Built-in iXJT+ module (Enhanced RF performance and less latency)
- Wireless trainer system
- Support via FrSky Free Link App
- FrSky FrOS (Support OpenTX System)
- 2 internal antennas and detachable external antenna
- Antenna detection and SWR warning
- Industrial LCD: 480x272 readable outdoor color screen
- Built-in Li-ion battery
- MC12P all CNC digital higher accuracy ten ball bearings, hall sensor gimbals and extendable stick ends
- Upgradeable firmware
- FrSky Horus X10S 16-Channel Transmitter - Carbon Fiber
- 2S Li-Ion battery and charger
- Soft carrying case
- FrSky 2.4GHz receiver - Select a FrSky receiver from our Receiver Collection
Number of Channels
Modulation / Protocol
Mode 1-2 (Default Mode 2)
60 Aircraft (more via SD card)
Industrial Day-Brite Color LCD
Ball Bearing Hall Sensor
|Memory Card Support|
|Dual Rate / Expo|
|Servo Speed Adjustment|
Rechargeable 2S Li-Ion battery (Included)
Product Spare Parts
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
Excellent transmitter, excellent price
This transmitter is different but feels good for weight and size. Takes a short time to learn its differences but if you have programmed a few of the other brands it will not be a problem. It has many great features that other radios do not offer. The display will knock your socks off !
Value for money, though there are a few gripes.
General build quality is good. Gimbals are great (although default difference in spring tension is annoying on the AIL/ELE stick). I would however wish they had balanced it better, and the case itself could've been in better quality material. Slighty thicker polycarbonate case would make it feel more solid. But a great radio. Flashed to OpenTX 2.2.2 and absolutely love it. A few cons: 1. The neckstrap and the whole solution for clipping it to the radio is bad. Also, given the poor balancing of the radio, they should include a balance bar. 2. Screen is unprotected. It's basically a ***** screen. Definitely need to be aware of moisture when using it. Also, any hits will most likely **** it instantaneously, but still. A 1mm clear cover would make the X10s feel more rugged and would instill some confidence when using it in less than optimal conditions. Flying nitro or gas, tools around etc. 3. The speaker could be better. 4. the sliders are relatively low resolution. Since they are center-mounted (and not arms, like on a Hitec aurora 9 for example), there is very little travel distance from 100 to -100 deflection. The center indent is also vague, so in effect it feels like there is very little travel from 100 to center, and center to -100. But all in all, it's a great radio. And still, it's great value for money. But these are things thaty would hardly influence the price, and just plain design mistakes (or maybe just my subjective opinion).
Taranis opentx user for five years ready for something new. X10s flashed with opentx amber sound files, skyracoons model images. No surprises great radio and a good step up from taranis which in it’s self is all you need.
Very impressive ! I like the FrSky menu better than Open TX ! Last TX you will ever need !
It is way more than I will ever need. I love the feel for it. I do not like the odd USB cable needed to connect to your computer.
This is the best radio I've ever owned. It is beautifully made (best of the Frsky transmitters), and very comfortable to fly with. I've installed OpenTX on mine and love the endless gui customization and pc setup options that come with it. On top of that, I always feel confident ordering from Motion! Great folks.
Great Radio - if you're willing to spend the time to learn it.
What a great radio! - especially if you're already familiar with the Taranis X9 line and OpenTx. Navigation through the screens and programming is even easier with the dial/buttons. Overall feeling of the radio is definitely of quality - it's slightly bigger and feels a tad heavier but it also has a more solid feel and the upgraded gimbals are smooth and precise. I'm very pleased.
Get you one of these!
Switched to this from a Taranis X9D+, love the feel of this TX! Flashed Open TX the day i got it and have not looked back, the color screen is awesome to put the actual picture of your craft on. unsurpassed quality. Battery life is better than expected, Gimbals are outright perfection.