Cart Preview

TechOne Malibu III 3D 844mm (33.2") Wingspan - ARF BUNDLE

Brand: TechOne /
Regular price $ 98.00
Status:
Share:
TEC0701007P

TechOne Malibu III 3D 844mm (33.2") Wingspan - ARF BUNDLE - TEC0701007P

The TechOne Malibu III is a fun, acrobatic performer made from 10mm crash-resistant and easy to repair EPP foam. Cut your teeth on all the usual 3D maneuvers such as loops, rolls, knife edge, hover, hammer heads, flat spins and so on. An excellent 3D plane that excells indoors but can fly outdoors (in calmer conditions) as well. Each flight is bound to give you several minutes of pure, unadulterated 3D excitement!

Tech Note: This TechOne ARF BUNDLE airplane requires intermediate level building skills. Some included components such as servos and motors do not come pre-installed and will need to be installed during the build process. Detailed building instructions are included with each model.

Features:

  • Designed with crash-resistant and easy to repair EPP foam
  • Excellent indoor 3D plane to master those aerobatic maneuvers
  • Specially designed for both slow, precise 3D acrobatics and normal flight
  • Powerful AT2206 V2 KV1500 Brushless motor for a wide flight performance envelope

Includes:

  • TechOne Malibu III 3D 844mm (33.2") Wingspan - ARF BUNDLE
  • AT2206 V2 KV1500 Brushless motor
  • 10 amp brushless ESC with JST connector
  • 3x 8g micro servos

Requires:

  • Minimum 4 Channel full range computer radio with programmable dual rates and expo - Click Here for recommendations
  • Minimum 4 Channel full range Receiver - Click Here for recommendations
  • 2 Cell 7.4V 400 - 500 mAh Li-Po battery with JST connector - 2S 450 mAh recommended
  • Li-Po battery charger - Click Here for recommendations

Product Specifications:

AGE LEVEL : 14 and up
SKILL LEVEL : Intermediate
BUILD TIME : 5 Hours

Wingspan

33.2in / 844mm

Length

N/A

Flying Weight

160 - 190g

CG (Center of Gravity)220mm - 230mm from the leading edge of the wing at the root

Power System

Powerful AT2206 V2 KV1500 Brushless motor (installed)

Electronic Speed Control

10 amp brushless ESC with JST connector (installed)

Propeller / EDF

Electric propeller

Servos

3x 8g micro servos

Landing GearFixed

Required Battery

2 Cell 7.4V 400 - 500 mAh Li-Po battery with JST connector (required)

Required Radio

4+ channel radio system (required)

AileronsYes

Elevator

Yes

RudderYes

Flaps

No

Lights

No

Hinge Type

Foam

MaterialEPP Foam
Skill LevelIntermediate
Build Time5 Hours
Recommended EnvironmentIndoor (Outdoor in calm conditions)

Product Videos

Product Reviews

Product Questions & Answers

Top