TechOne Swift 3D 1200mm (47.2") Wingspan - ARF
TechOne Swift 3D 1200mm (47.2") Wingspan - ARF - TEC0702003K
The TechOne Swift EPP is a 3D flyer that can penetrate through moderate winds while performing show-stopping 3D maneuvers with ease. Both wing and gear are easily removable for transport and/or flying preference. Made of light yet durable and thick EPP foam with a streamlined and aerodynamic profile, the Swift is tailor-made for countless hours of exhilarating, flying fun!
- Slick, streamlined and aerodynamic profile with sharp red, blue and yellow livery
- Easy-to-remove landing gear for transport and flying preference
- TechOne Swift 3D 1200mm (47.2") Wingspan - ARF
- 4 Channel Radio - Select a minimum 4 channel radio from our Radio Collection
- 4 Channel Receiver - Select a minimum 4 channel receiver from our Receiver Collection
- TechOne AS2814 KV1000 Brushless motor - TEC1001013
- TechOne 40 Amp Brushless ESC - TEC1002007
- 4x TechOne 17g Servo - TEC1003009C
- 3 Cell 11.1V 1300 mAh Li-Po battery with T connector - EPR13003
- 3 Cell Compatible Battery Charger - Select a minimum 3 cell (3S) charger from our Charger Collection
44.1in / 1120mm
46.5in / 1180mm
810 - 900g
|CG (Center of Gravity)||120 - 130mm from the leading edge of the wing at the root|
|Powerful AS2814 KV1000 Brushless motor (required)|
Electronic Speed Control
40-amp brushless ESC with T connector (required)
Propeller / EDF
4x 17g (required)
3 Cell 11.1V 1300 mAh Li-Po battery with T connector (required)
4+ channel radio system (required)
|Build Time||5 Hours|
Product Spare Parts
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
- February 12, 2017 - The TechOne ARF BUNDLE version of this airplane requires intermediate level building skills. Some included components such as servos and motors do not come pre-installed and will need to be installed during the build process. Detailed building instructions are included with each model.
If you need any additional assistance, please visit the Motion RC Help Center
Good slow fly plane for 3D. Easy build.
Assembly was straight forward and didn’t take too long. There was no manual included in the kit, but I did find it online. Unfortunately the fuselage was not completely straight, I set up some books, etc. to stress the fuselage in the opposite direction and let it sit for a day. It helped but didn’t completely fix it. Nonetheless it flies great! Would have given it 5 stars if it didn’t have the fuselage issue. I didn’t see anywhere that it’s supposed to be like that, bent to the left- if it was to the right I may have thought it was done intetionally to give it some right thrust
Great 3D Trainer; You do learn 3D with it.
The fuselage came a little warped. When joining the wing halves, install the carbon spars first. Doing so, will help you align the wing much easier. Be sure to visit the Tech one and Swift 3D threads in RCG for good tips. In order to have a good CG on mine, I had to cut the battery slot back an inch. And this is using a light 3S 1500 25C Lipo battery. The CG on mine is at the wing spar (about 130mm from the LE at the root chord). You might like a different CG point but I mention this in case you find yours nose heavy. The Swift flies very well. You do learn 3D with this foamy, and I’m having fun with it!
Waited a long time for out of stock condition to be resolved but it was worth it .
Create for practicing 3D.
Create for practicing 3D.
I haven't opened the box yet. It is to replace the one I already have when the ground hits it.
no major problems, a little
no major problems, a little fiddling for fit, slight warp in rear of fuse
Takes some work to get in the air, that being said I'm impressed with the construction, rigidity and stability, even on windy days. Also, the rudder is huge allowing for quick turnarounds, easy flat spins and knife edge loops. Still working on knife edge coupling issues.. I've posted the maiden on YouTube: https://www.youtube.com/watch?v=kJcNzeGxfkM Tips: *Highly recommend beacon foam tac for assembly *Recommend adding a skid or tailwheel to prevent rudder dragging *Prefer taller front landing gear, not necessary