Where Customers Matter
TechOne Thunder 180 F3P Red 900mm (35.4") Wingspan - PNP
This product is discontinued
Spare parts available below
Quick links
Share:
TEC0880010P-RED
TechOne Thunder 180 F3P 900mm (35.4") Wingspan in Red Color Scheme - PNP - TEC0880010P-RED
The TechOne Thunder 180 F3P is a 3D flyer made of durable, lightweight Depron foam for rigidity that can help you perform show-stopping indoor 3D maneuvers with ease. Both wing and gear are easily removable for transport and/or flying preference. Can be flown both indoors in a large area like a gym or outside. With a streamlined and aerodynamic profile, the Thunder 180 F3P is tailor-made for countless hours of exhilarating, flying fun!
Features:
- Slick, streamlined and aerodynamic profile with sharp red and blue livery
- Lightweight design for experienced indoor pilots (can be flown outdoors as well)
- Easy-to-remove wing and landing gear for transport and flying preference
- Powerful AS2204 KV1700 Brushless motor for a wide flight performance envelope
Includes:
- TechOne Thunder 180 F3P 900mm (35.4") Wingspan - PNP
Requires:
- 4 Channel Radio - Select a minimum 4 channel radio from our Radio Collection
- 4 Channel Receiver - Select a minimum 4 channel receiver from our Receiver Collection
- 2 Cell 7.4V 350 mAh Li-Po battery with JST connector - EPR03502J
- 2 Cell Compatible Battery Charger - Select a minimum 2 cell (2S) charger from our Charger Collection
Product Specifications:
AGE LEVEL : 14 and up
SKILL LEVEL : Intermediate
BUILD TIME : 2+ Hours
Wingspan | 35.4in / 900mm |
Length | 38.4in / 976mm |
Flying Weight | 249g |
| CG (Center of Gravity) | 75-85mm from the leading edge of the wing at the root |
Power System | Powerful AS2204 KV1700 Brushless motor (installed) |
Electronic Speed Control | 10-amp brushless ESC with JST connector (installed) |
Propeller / EDF | Electric propeller |
Servos | 4x 8g micro servos |
| Landing Gear | Fixed |
Required Battery | 2 Cell 7.4V 350 mAh Li-Po battery with JST connector (required) |
Required Radio | 4+ channel radio system (required) |
| Ailerons | Yes |
Elevator | Yes |
| Rudder | Yes |
Flaps | No |
Lights | No |
Hinge Type | Foam |
| Material | Depron Foam |
| Skill Level | Intermediate |
| Build Time | 2+ Hours |
| Recommended Environment | Indoor/Outdoor |
Product Videos
Product Upgrades
Product Questions & Answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.Product Support
Product Manuals:
If you need any additional assistance, please visit the Motion RC Help Center
