Popular Bundle
F-16 Falcon 64mm EDF Jet V2 - PNP from Freewing - FJ11112P
Version Info: This is the V2 version of the Freewing 64mm F-16. This version has two additional servos for the elevator. Now both elevator and ailerons are on 4 separate servos. The EDF and motor have been updated to add more power. Read below for a full description of V2 features.
The clean lines, classic profile, and scale details are all captured in this exceptional 64mm EDF Jet F-16C Fighting Falcon from Freewing. Simplicity and durability were major design factors with this model. The airframe has been refined with a simplified control and gear structure that reduces the overall weight and wing load. The ailerons and elevators are on 4 separate servos, no longer tied together with two servos. An updated V2 40A ESC includes a reverse thrust function to help slow the jet on the landing roll out along with an upgraded 12 blade EDF with 2840-2850Kv brushless motor. Quality electronic components come pre-installed so you can be in the air in less then one hour.
Visit the Official Freewing 64mm F-16 Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
Features:
- NEW! 40 Amp V2 Electronic Speed Control has reverse thrust functionality
- NEW! The ailerons and elevators are on 4 separate servos
- NEW! Comes with an upgraded 12-Blade EDF with 2840-2850Kv brushless motor
- NEW! Updated nose gear and pushrod set
- NEW! Updated fuselage to accommodate 2 additional servos
- 4S LiPo capability for High Performance Flight
- Scale details including panel lines
- 3x 9g digital gear servos come pre-installed
Includes:
- Freewing F-16 Falcon 64mm EDF Jet V2 - PNP
- Servos, motor, fan unit and ESC are all pre-installed
Requires:
- 5 Channel Radio - Select a minimum 5 channel radio from our Aircraft Radio Collection
- 5 Channel Receiver - Select a minimum 5 channel receiver from our Aircraft Receiver Collection
- 4 Cell 14.8V 2200 mAh LiPo Battery with XT60 Connector - EPR22004PROX6
- 4 Cell Compatible Battery Charger - Select a minimum 4 cell (4S) charger from our Charger Collection
Power System and Electronics Compatibility:
This model is designed to operate using the included ESC and its integrated BEC, which is specifically matched to the onboard electronics. To ensure reliable performance and prevent damage, always power the aircraft's receiver and electronics through the installed ESC using the main flight battery. Do not use any power source other than the main flight battery to power the model, otherwise damage will occur to the electronics.
The receiver, servos, and other onboard electronics included with this model are rated for a maximum input voltage of 5.5V. When selecting your ESC and power system, verify that the BEC output supplied to the receiver and onboard electronics does not exceed 5.5V. Using a higher voltage will damage the aircraft's electronics.
Product Specifications:
Model Scale |
1/15 Scale |
Wingspan |
680mm / 26.8in |
Length |
1050mm / 41.3in |
Flying Weight |
730g (without battery) |
CG (Center of Gravity) |
81mm from the leading edge of the wing root |
Power System |
2840-2850Kv Brushless Motor |
Speed Control |
40A, internal SBEC with XT60 Connector |
Propeller / EDF |
64mm 12-Blade EDF |
Servos |
|
Landing Gear |
Fixed main landing gear, steerable nose gear. |
Required Battery |
4S 14.8V 2200mAh with XT60 Connector |
Required Radio |
5 Channel 2.4ghz radio |
Ailerons |
Yes |
Elevator |
Yes |
Rudder |
Yes |
Flaps |
No |
Lights |
No |
Hinge Type |
Nylon hinges on all control surfaces |
Material |
EPO Foam |
Skill Level |
Intermediate |
Build Time |
1 Hour |
Recommended Environment |
Outdoors |
Reviews & Questions
Customers who bought this item also bought
Admiral Pro 2200mAh 4S 14.8V 45C LiPo Battery with XT60 Connector
SKU: EPR22004PROX6