Freewing F-35 Lightning II V2 70mm EDF Thrust Vectoring Jet - PNP
70mm Freewing F-35 Lightning II EDF V2 with Electronic Retracts and Vectored Thrust - Receiver Ready (PNP) - FJ20111P
Discontinued Product
This product is being discontinued. Product and replacement parts will be available only while remaining inventory lasts.
This is the new version 2 of the top selling Freewing F-35 Lightning II Joint Strike Fighter. The primary change in this new version 2 is the landing gear. The servo actuated landing gear found in version 1 has been replaced with full electronic retracts with metal trunnions. Now you can enjoy this ultra-maneuverable, vectored thrust jet even more knowing that the upgraded landing gear is more durable and more reliable.
Features:
- Model officially licensed by Lockheed Martin
- 12-blade fan and 60 Amp ESC
- Retractable main landing gear with full electronic retract and black anodized metal trunnion (replaces older servo actuated retract design)
- 360 degree vectored thrust for incredible maneuvers like flat spins, flip turns, and high alpha flight
- Super scale features including Joint Strike Fighter graphics, hand painted pilot figure, detailed cockpit, and independently controlled elevators
- Shock-absorbing, steerable nose gear will protect the plane on hard landings and make it easier to maneuver during taxi and takeoff
- 3000Kv motor combined with 60A ESC with XT60 Connector and 4S LiPo battery give the F-35 the speed and performance demanding RC jet pilots expect
- Strong, nylon hinges installed on all control surfaces (superior to foam hinges)
- All major components including 70mm ducted fan, brushless motor, electronic speed control, and servos come pre-installed for your convenience
Requires:
- 6 Channel Radio - Select a minimum 6 channel radio from our Radio Collection
- 6 Channel Receiver - Select a minimum 6 channel receiver from our Receiver Collection
- 4 Cell 14.8V 2200 mAh LiPo Battery with XT60 Connector - EPR22004PROX6
- 4 Cell Compatible Battery Charger - Select a minimum 4 cell (4S) charger from our Charger Collection
Power System and Electronics Compatibility:
This model is designed to operate using the included ESC and its integrated BEC, which is specifically matched to the onboard electronics. To ensure reliable performance and prevent damage, always power the aircraft's receiver and electronics through the installed ESC using the main flight battery. Do not use any power source other than the main flight battery to power the model, otherwise damage will occur to the electronics.
The receiver, servos, and other onboard electronics included with this model are rated for a maximum input voltage of 5.5V. When selecting your ESC and power system, verify that the BEC output supplied to the receiver and onboard electronics does not exceed 5.5V. Using a higher voltage will damage the aircraft's electronics.
Product Specifications:
AGE LEVEL : 14 and up
SKILL LEVEL : Intermediate
BUILD TIME : 1 Hour|
Wingspan |
800mm / 31.5in |
|
Length |
1150mm / 45.3in |
|
Flying Weight |
100g / 38.8oz |
| CG (Center of Gravity) | check manual |
|
Power System |
2849-2850kV Brushless Outrunner Motor |
|
Electronic Speed Control |
60A, XT60 Connector |
|
Propeller / EDF |
70mm 12-Blade EDF with Vectored Thrust |
|
Servos |
9g standard gear with 100mm lead : nose gear steering, left aileron, right aileron, left elevator |
| Landing Gear | Full electronic retractable nose and main landing gear with metal trunnions |
|
Required Battery |
4S 14.8V 2200mAh 30C LiPo |
|
Required Radio |
6 Channel |
| Ailerons | Yes |
|
Elevator |
Yes |
| Rudder | No |
|
Flaps |
No |
|
Lights |
No |
|
Hinge Type |
Nylon hinges |
| Material | EPS Foam |
| Skill Level | Intermediate |
| Build Time | 1 Hour |
| Recommended Environment | Outdoor |