GT Power Aircraft Navigation Lighting System
Aircraft Navigation Lighting System from GT Power - GTPNAVAIRLED
Complete LED navigation lighting system for your model aircraft up to .60 size. The GT Power LED Lighting System consists of eight bright LED lights, a control board with power lead, and clamps for securing the LEDs to the fuselage and wings of your aircraft, as well as double-sided tape for securing the control boardwithin the fuselage.
The included lights and patterns are as follows:
- 2 white constant bulbs
- 1 green constant bulb
- 1 red constant bulb
- 2 white strobe bulbs
- 2 red slow-flashing bulbs
The control board power lead features a male JR plug for connection to any open channel on the receiver. We suggest using a UBEC or receiver battery pack to provide adequate power to these lights, as the standard linear mode BEC on most ESCs may become overloaded. Another option is to use an ESC that has a switch-mode BEC.
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
These are essential lights for authentic looks when replicating scale aircraft.. It also creates a cool look and adds realism to the aircraft. I have two Yak-130s jets and two scale MD500 helicopters and Navigation lights are a must.
Lights lights lights
Superb !!!!!!!! I didn’t expect the light to be this good
Nice features, easily assignable for the airplanes they are being used in. Great addition for realistic lighting on several of my air frames. I now have this light system in 6 aircraft and each one has a slightly unique assignment compared to the others.
GT POWER LED Lighting System
The LED Lighting system works good, and is bright enough for day time use. The controller programming needs help. In all but 1 mode, the landing lights flashing, the landing lights should never flash. Also there is no option to turn off the landing lights off and leave all the other lights on.
Old topflight .61 Corsair build long time in the works
I have not installed yet but seems to be of good quality and a easy understanding of how it hooks up good instructions will buy again
GT Power aircraft navigation light system
Awesome kids easy to put together recommend to anybody that is going to put it into aircraft or helicopter .
This light set works great, directions were easy : ) I put the lights on my Tundra and it's fun to fly and see in the early morning and evenings!!
I like the product. The
I like the product. The landing lights do not stay on, they flash very very slowly, they are connected properly. A work around is to connect them to one of the other sockets and then cycle the the off/on switch on the transmitter until the LL stay on without flashing. Of course all of the other lights follow the same pattern simultaneously. Advice would be appreciated. Thanks!
Inexpensive, works great (seal with silicone for boats) EASY install.