A-26 Invader Camo 1730mm (68") Wingspan - ARF from Nexa - NXA1021-001

The Douglas A-26 Invader (designated B-26 between 1948 and 1965) is an American twin-engined light bomber and ground attack aircraft. Built by Douglas Aircraft Company during World War II, the Invader also saw service during several major Cold War conflicts. A limited number of highly modified United States Air Force aircraft served in Southeast Asia until 1969. It was a fast aircraft capable of carrying a large bomb load. A range of guns could be fitted to produce a formidable ground-attack aircraft.

The Nexa A-26 Invader is a 68" wingspan electric or gas option scale series warbird, constructed primarily from balsa wood and covered with a fuel-resistant covering. This ARF requires assembly and installation of your choice of servos and power system, and includes painted pilot, tanks, antenna and other scale details. The large battery hatch affords ample room for either electric or gas setups. To complete the scale appeal of this A-26, the model includes electric retracts and scale struts. Impress at your flying field with this iconic stunner!

Visit the Official Nexa A-26 Invader 1730mm ARF Discussion Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.

Fully Covered and Detailed

The Nexa A-26 Invader comes fully covered including simulated panel lines, rivets, nomenclature and weathering detail.

Scale Details Throughout

There is no shortage of scale details with this A-26 including fuel tanks, antenna, machine guns, painted pilot, electric retracts and metal main struts.

Prehinged and Installed Control Surfaces

Prehinged and Installed Control Surfaces

All control surfaces come out of the box fully prehinged and installed for your convenience.

Impressive Size

To add to the array of scale detail, the Nexa A-26 comes with a nearly 70" wingspan.

Features:

Complete Balsa and lite-ply construction for rigidity and durability
Covered from tip to tail in scale details including weathering, printed simulated panel lines and rivets
Fiberglass cowlings for strength and durability
The hand-painted pilot is ready for your added cockpit details
All control surfaces come out of the box pre-hinged and installed for convenience
Tanks, antenna, guns and more complete the fantastic scale appeal
Large battery hatch allows for your chosen electric or gas setup

Includes:

Nexa A-26 Invader Camo 1730mm (68") Wingspan - ARF
Electric retracts, wheels and struts
Fuel tank, hardware and servo trays

Requires:

6 Channel radio - select a minimum 6 channel radio from our Radio Collection
6 Channel receiver - select a minimum 6 channel receiver from our Receiver Collection
2x Brushless outrunner motors - we recommend the Admiral GP5 4220-770Kv Brushless Motor Multi-Pack (2 Motors)
2x 45 Amp brushless ESC - we recommend the ZTW Mantis G2 45A ESC with 4A SBEC Multi-Pack (2 ESCs)
4x standard servos for ailerons, elevator and rudder - we recommend the Hitec HS-485HB Deluxe Ball Bearing Karbonite Gear Standard Servo Airplane Multi-Pack (4 Servos)
TWO 4 Cell 14.8V 3000 mAh LiPo Batteries - we recommend the Admiral 3000mAh 4S 14.8V 35C LiPo Battery with XT60 Connector Multi-Pack (2 Batteries)
1x standard and 1x reverse electric propellers - we recommend APC 12x8 Thin Electric Propeller - Black and APC 12x8 Thin Electric Pusher Propeller - Black
4 Cell compatible battery charger - select a minimum 4 cell (4S) charger from our Charger Collection

Gas Requires:

2x .25 - .52 (4cc - 8.5cc) gas engines
1x standard and 1x reverse gas propellers

Customer Note

Nexa ARF models are constructed out of balsa wood and plywood. These are not foam models. The assembly of balsa wood ARF aircraft requires basic model building skills including the installation of servos, ESC, and motor (or gas engine).

Country/region

Nexa A-26 Invader 1730mm (68") Wingspan With Retracts and Scale Struts - ARF