-
Overview
-
Videos
-
Spare Parts
-
Upgrades
-
Q&A
-
Support
Overview
Videos
Spare Parts
Upgrades
Q&A
Support
Overview
Nagato 1/200 Scale 1125mm (44") Japanese Battleship from Bancroft - RTR - BNC1021-003
Conquer the waves with Bancroft, the world’s premier RC Boat brand available exclusively at Motion RC! Bancroft’s line of RC vessels is as vast as the seven seas, specializing in high scale RC Warships, Yachts, Speedboats, and more! Equally at home on your mantle with its included display stand or sailing on calm lakes or pools, Bancroft vessels are made of high-quality materials including ABS, fiberglass, real wood, and photo-etched brass and steel parts.
The Nagato-class battleships were a pair of dreadnought battleships (Nagato and Mutsu) built for the Imperial Japanese Navy (IJN) during World War I. The Nagato served as the flagship for Admiral Isoroku Yamamoto during the surprise attack on Pearl Harbor on December 7, 1941 that triggered American entrance into the Pacific War.
Bancroft’s Elite Series of warships continues with the 1/200 scale Battleship Nagato. Display this museum piece on your mantle or astonish your RC boat club with this functional RTR (Ready to Run) RC battleship. Over 400 total parts and 100 man-hours of work are already completed for you.Delivered Ready to Run (RTR), the vessel can be sailing within minutes of arrival, using the included 2.4Ghz radio transmitter and 2s Li-Ion battery. Only four AA batteries and minimal final assembly is required.
Visit the Official Bancroft Nagato 1/200 Scale Japanese Battleship Thread on HobbySquawk.com for additional photos, videos, reviews, and customer Q&A.
 |
Removable Turrets The Nagato's fully detailed main turrets can be easily positioned for static display or removed for transport or further customizing. Each main turret's barrels can be positioned up and down independently. |
 |
Easy Access Electronics Bay The Nagato's primary superstructure is molded around one central piece that can be easily removed with one hand. To access the hull interior, the entire superstructure is pulled cleanly off of the deck. |
 |
Pin-Sized Details Over 100 hours of handcrafted details are built at the factory using hundreds of fingernail sized brass Photo-Etched (PE) parts and larger sub-assemblies |
 |
Pre-Installed Superstructure Hundreds of hours of workmanship are done meticulously at the factory. Every sub-component is assembled from multiple materials, then detailed and painted by craftsmen. |
 |
Genuine Wood Deck The Nagato's one-piece molded hull and deck is covered by a single large laser-cut and laser-etched genuine wood deck |
 |
Pre-Installed Rigging The bridge's many rigging lines are pre-installed at the factory. There remains just a few anchors for the user to position when he/she receives the model out of the box. Just one anchor is needed to be undone in order to service the interior of the boat. |
 |
Photo-Etched Brass Foredeck Textured photo-etched (PE) foredeck and aftdeck is made of brass, pre-painted, and pre-installed. Amazingly sharp details are rendered in pin-sized resolution at 1/200 scale! |
|
RTR - Ready To Run A 2.4Ghz radio system is included and pre-installed, as are all internal electronics. A primary battery and charger are also included. Simply charge the included primary battery with the included charger, then insert your AA batteries into the radio transmitter to begin sailing! |
Features:
- RTR (Ready to Run) with 2.4Ghz radio, receiver, battery, and charger
- 2.4Ghz radio system and all electronics Pre-Installed
- Fully Painted and Detailed
- Zero assembly required --Get underway in minutes!
- Durable fiberglass one-piece molded hull and deck
- Genuine wood decking, laser-cut and laser-etched
- Over 300 brass photo-etched (PE) parts and high detail parts
- Extensively detailed and hand finished
- Meticulous hand craftsmanship
- Four 390 brushed motors with steel drive shafts
- Four genuine brass screws (propellers) arranged in counter-rotating pairs
- Quick-Detach Superstructure for easy access to the ship's interior
- Pre-Installed Rigging with simple disconnect design
- Positionable main turrets
- Rated for calm ponds, pools, and lakes appropriate for RC Boats
Includes:
- Bancroft Nagato 1/200 Scale 1125mm (44") Japanese Battleship - RTR
- 2.4Ghz Radio and Receiver, pre-installed
- Four motors drive system, pre-installed, with XT60 battery connector
- Four brass propellers
- Steering servo and rudder, pre-installed
- 2s 7.4V 2800mAh Battery
- 2s Battery Charger
- Basic Tabletop Display Stand
Requires:
- Four (4) AA-sized 1.5V dry cell batteries, Alkaline or NiMH - we recommend Admiral AA NiMH 2600mAh rechargeable batteries
Bancroft model boats are molded and hand finished using very intricate details and parts including metal, wood, plastic, and fiberglass. Because of their hand made nature, minor imperfections in the fiberglass, metalwork, or painting may exist. These potential imperfections will not affect the seaworthiness of the vessel or the overall scale boating experience. Bancroft scale RC boats are fragile so care should be taken when moving or transporting your model.
Some of the electronics in this Bancroft boat, including the Battery, ESC, Motor, and Receiver, are NOT intended to get wet; they are NOT water resistant. If any of these electronic components get wet and you attempt to operate your model, the water can cause an electrical short-circuit and void your warranty. In the rare instance that you get water inside your vessel, you should drain the water completely and allow all electronics to fully dry before attempting to operate your model.
Product Specifications:
Scale |
1/200 |
Length |
1125mm / 44.2in |
Width |
185mm / 7.2in |
Height |
272mm / 10.7in |
Hull Material |
Fiberglass |
Battery |
7.4V 2800mAh |
Battery Quantity |
1 |
Battery Connector |
XT60 |
Motor |
390 Brushed Motor |
Motor Quantity |
4 |
Propeller Material |
Metal |
Contra-Rotating Propeller |
Yes |
ESC |
80A |
ESC Waterproof |
Splash-Proof |
ESC Quantity |
1 |
Radio |
Stick |
Receiver Channels |
6 |
Videos
Product Videos
Spare Parts
Product Spare Parts
1 - 8 of 8 results
Upgrades
Product Upgrades
Futaba 3PV 3-Channel Transmitter with R203GF Receiver For Surface Models
SKU: FUTK3201
$14999
Sold out
1 - 7 of 7 results
Q&A
Product questions & answers
NOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center
Support
Product support
Product Manuals:
If you need any additional assistance, please visit the Motion RC Help Center
Customer Reviews
-
Overview
-
Videos
-
Spare Parts
-
Upgrades
-
Q&A
-
Support
- Regular price
- $1,46900
- Sale price
- $1,46900
- Regular price
- $
- (Save $-1,469.00)
- Unit price
- per
