BavarianDEMON 3X Flybarless System
3X Flybarless System from BavarianDEMON - DEMBD3X
The proven bavarianDEMON 3-axis sensor makes the 3X the flybarless system of superlatives. Equipped with absolute precise control of the swashplate and the rear, the 3X provides highly sophisticated 3D maneuvers in all flight positions.
The bavarianDEMON 3X can be used in all paddleless model helicopters of all types and sizes, from 250cc to large scale helicopters, from electric and nitro to burners and turbines. It also supports all popular types of servo and swashplate types as well as virtual swashplate rotation.
The combination of modern sensor technology and highly intelligent software algorithms not only increases the performance of the 3X Flybarless system, but also that of your RC Helicopter. Heli models without auxiliary paddles (flybarless) meanwhile benefit from increased agility and agility.
This allows a performance increase of about 15% and a gigantic flight performance. On top of that, there are no adjustments to the sensitive paddle mechanism.
- Extremely compact flybarless system
- High-quality silicone MEMS gyros on gold-plated board
- Setup Wizard
- Realtime Tuning
- Intelligent software algorithms
- Ideal for 3D demonic flight maneuvers
- Absolute stability, even in large scale helicopters
- Instructions, PC software and firmware updates via web
- BavarianDEMON 3X Flybarless System
- adhesive pads
- Cable loom
- USB cable
4-10V (2S-LiPo-compatible, min. 5.5V using Spektrum/JR satellites)
Max. roll & pitch rotational speed
Max. tail rotational speed
Servo frame rate
55Hz / 220Hz selectable
Tail servo output
1.520µs / 760µs selectable
Maximum servo currents
Total 10A (continuous load)
18g (without cable loom)
Length of connecting cables to receiver
Product Spare Parts
Product Questions & AnswersNOTE: Questions submitted on this page are answered by customers who have previously purchased this item. If you have a support related question that requires immediate assistance, please visit our Help Center.
- May 2, 2019 - Click this link for additional product support such as software/firmware updates, technical support, etc.
If you need any additional assistance, please visit the Motion RC Help Center