FlightLineRC P-38L Lightning "Allied Green" 1600mm (63") Wingspan - PNP
FlightLineRC P-38L Lightning "Allied Green" 1600mm (63") Wingspan - PNP - FLW3012P
The legendary P-38 “Lightning” revolutionized aviation history in World War II. Designed by a skilled team of engineers led by Clarence Johnson and Hal Hibbard, the P-38 was the only American fighter that was continually produced from before Pearl Harbor in 1941 to after the Japanese surrender in 1945. Over 9,900 P-38s were built, 3,810 of which were the superior P-38L variant. Revered by its foes as the “fork tailed devil”, the P-38 excelled as a fighter, interceptor, reconnaissance platform, long range escort, and as a ground attack aircraft. The P-38 Lightning was flown by the top four higher scoring American Aces in World War II. The aircraft also famously shot down Admiral Isoroku Yamamoto’s aircraft during “Operation Vengeance” on April 18, 1943.
FlightLineRC’s P-38L Lightning is a 1600mm wingspan, semi-scale flying replica molded from EPO foam. FlightLineRC’s P-38 represents the pinnacle of engineering for a foam electric P-38. It is the largest mass-produced foam electric P-38 in the world, with a high level of quality and scale fidelity. We know our customers have been waiting for a large P-38 with good size, clean wiring, and scale lines. The wait is over, it’s here!
In direct collaboration with MotionRC, this P38 was designed for easy operation. Its outer wings disassemble with four screws for convenient transportation and allowing the aircraft to sit on all three wheels without the outer wings attached. The horizontal stabilizer can also be removed with screws for maintenance or replacement. FlightLineRC’s P-38 Lightning features durable electronic retractable landing gear, five sequenced servo driven landing gear doors, day-bright LEDs, machine gun details, plastic nose cone and cowls, four flaps, accurate canopy and nacelle shape, and other scale details. The correct wing dihedral and other scale profiles were precisely modeled to produce an accurate P-38 shape which honors this historic warbird. Each rudder is directly controlled by its own servo. The cockpit layout accommodates a wide range of 4S 14.8v Li-Po batteries with ample space for electronics, all accessible under the long magnetic hatch cover which spans almost the entire length of the pilot’s nacelle. To ensure a high degree of structural rigidity, the entire model was designed around a special framework of carbon rods and reinforcement points. This framework strengthens the aircraft during high speed maneuvers, while still providing a gentle and forgiving flying behavior.
The stock PNP version is equipped with two 3748 brushless outrunner motors and two 12x7 3-blade counter-rotating propellers for the perfect scale appearance. With the recommended 4S 14.8v 5000mAh (one battery per side or a single battery with your series adapter), the P-38 boasts sufficient power for large consecutive loops and a level top speed of 81mph. An optional “High Power Upgrade Set” can be purchased separately to obtain a level top speed of 94mph. The Upgrade Set includes two 3648 motors, two 12x8 2-blade counter-rotating propellers, and two 2-blade spinners.
Color Schemes and Decal options:
The P-38 is offered in two color schemes, “Pacific Silver” and “Allied Green”. The “Pacific Silver” scheme includes four decal sets from the 431st Squadron led by Medal of Honor recipient Thomas McGuire. The “Allied Green” scheme includes four decal sets from various squadrons in Europe and other theaters. Choose which decal set you want to apply to make your P-38 unique among your friends! The decals are "peel and stick", made with a very thin adhesive vinyl which is easy to apply and does not require water. Click Here to see an image of the decal manual (hover over and click on the image for a detailed view).
Tech Note: There has been some confusion in the forums regarding the twin ESC wiring setup for this model. Extensive testing has been done in direct partnership with the ESC manufacturer, culminating in hundreds of successful flights without the need for removing any of the power (red) wires from one of the ESCs BEC. Both ESCs Y-harnessed together are plugged into the receiver's single throttle channel without the need for ANY red wires being removed.
- Scale profile, accurate wing diherdral, and precisely modeled overall aircraft proportions
- Removable outer wings for easy transport
- Scale three blade propeller achieves 81 mph and vertical climbing capability
- Four different decal sets included inside the box for you to choose from
- Day-bright LEDs
- Large cabin space for easy placement of the battery and radio equipment
- Improved spinner and propeller mounting design to enable better balance
- Durable Electric retractable landing gear with metal trunions and 4mm steel wire struts
- Sequenced plastic gear doors for realistic operation
- Tall foam rubber wheels for optimal handling on paved surfaces and short, evenly cut grass fields
- FlightLine P-38L Lightning "Allied Green" 1600mm (63") Wingspan - (PNP)
- Motor, ESC, servos and retracts pre-installed
- Minimum 6 Channel Radio - Click Here for recommendations
- 6 Channel Receiver - Click Here for recommendations
- Two 4 Cell 14.8V 2500mAh to 3000mAh LiPo battery with T Connector – We recommend 2 of the Admiral 4 Cell 14.8V 2500mAh Pro LiPo batteries
- OR One Admiral 4 Cell 14.8v 5000mAh battery with EC5 connector (NOTE: will require an EC5-to-two-T-connector adapter)
- Lipo Battery Charger - Click Here for recommendations
- An optional “High Power Upgrade Set” can be purchased separately to obtain speeds of 94mph+. The Upgrade Set includes two 3648 motors, two 12x8 2-blade counter-rotating propellers, and two 2-blade spinners. Click the Upgrades Tab above for more details.
1600mm / 63in
1168mm / 46in
Weight (w/o battery)
3150g / 111oz
|CG (Center of Gravity)||65-70mm from the leading edge of the wing at the root|
3748-600Kv Brushless Outrunner Motor (Stock scale power system)
Electronic Speed Control
60A Brushless with T connector
Propeller / EDF
12x7 3 Blade Propeller / 12x8 2 Blade Propeller High Performance Version (optional)
9g standard with 300mm lead: nose gear door
|Landing Gear||Electric retracts with metal trunions|
Two 4 Cell 14.8v 2500mAh to 3000mAh batteries with T-connector, or One 4 Cell 14.8v 5000mAh battery with EC5 connector (will require an EC5-to-two-T-connector adapter)
6+ Channel 2.4GHz
|Build Time||3-4 Hours|
|Recommended Environment||Outdoor, minimum 200 foot runway, pavement recommended, less than 1" tall smooth grass|
Product Spare Parts